Announcement

Collapse
No announcement yet.

How Could I Improve...

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • How Could I Improve...

    My opinion doesnt count for much ,but if I were you Id stop powering lifters with S28-400s and use LEM-130s instead. And you may as well make Armory invertable if the wheels are external.
    Ive never heard of astro-flights, maybe someone else has?
    Also Tenderizer needs psi for the co2. How much do you plan to run it on? And dont expect your armour on Armory and Tenderizer to be OK if they come against spinners.

    (Message edited by Robot_Warrior on April 24, 200

    Comment


    • How Could I Improve...

      Corsairs Srimech: An electric lifting arm, built into the back of the robot, powered by a 24V LEM-130.

      Comment


      • How Could I Improve...

        quote:

        Ive never heard of astro-flights, maybe someone else has?

        I have, for featherweights.

        Comment


        • How Could I Improve...

          Didnt Biohazard use astro-flights?

          Or that american cage spinner

          Comment


          • How Could I Improve...

            BioHazard 96 to 99 used two permanent magnet DC motors that Carlo ordered from a surplus dealer. BioHazard 2000-2003 uses the S28-400 Magmotors.

            Comment


            • How Could I Improve...

              There was an middleweight in Robotica I believe that used Astros for drive. Either way, I would not use them in a heavy unless you use a lot of them (2-3 per wheel or so).

              Comment


              • How Could I Improve...

                if thats the case,

                Power: 4x S28-400 Magmotors powered by 5x NiCad Battlepacks.

                Comment


                • How Could I Improve...

                  Tenderizers hammer runs on 210psi Co2.

                  Comment


                  • How Could I Improve...

                    Mark, you might want to rethink the ground clearance on some of them...Tenderiser for example. I dont see how Hells Teeths shape automatically gives it 0 ground clearance all around, and with 0 all around you wont move anyway.

                    Comment


                    • How Could I Improve...

                      OK,

                      Ground Clearance: The shape gives the back half 0mm ground clearance, and the front half 5mm ground clearance.

                      Comment


                      • How Could I Improve...

                        Youll have trouble reversing now I should think!

                        Comment


                        • How Could I Improve...

                          no, because the wheels are at the front.

                          Comment


                          • How Could I Improve...

                            Yes, but the back will scrape the ground when you reverse

                            Comment


                            • How Could I Improve...

                              Liam, would any one of your robots mind facing Cyrilium Mach 2 in a grudge match?

                              Comment


                              • How Could I Improve...

                                I need to see how it fares in combat, so it will be ready for the EOTR Challenge Belt.

                                Comment

                                Working...
                                X