If this is your first visit, be sure to check out the FAQ. You may have to register
before you can post: click the register link above to proceed. Please email info@fightingrobots.co.uk if you have any questions.
Heres a little piece of machinery Id like to enter in the New Blood competition
Name - Sheer Heart Attack
Shape - Invertible tracked box, only the main-body between the tracks is shorter then the tracks (as can be seen on the picture), build in such a way that the tracks are in contact with the ground no matter what (like 101), only with two titanium bars at the end of both tracks to protect them from destructive spinners
Weight - 110 Kilogram
Speed - 24 km/h (15 mph)
Dimensions - 90*100*25 cm
Ground Clearance - Zero underneath the tracks, but with an overhang
Power -2x LEM130s at 48v
Movement - Two sturdy titanium tracks, with rubber strips attached to them for traction
Turning Circle - Zero
Weaponry - A 22 kilogram titanium spinning drum at the front of my machine equipped with 10 hardox teeth, powered by a LEM 130 and spinning around at 5000 RPM, which produces nearly 40 kJ.
Armour - 6 mm titanium all around (including the tracks themselves)
Srimech - It€™s invertible
Strenghts - Devestating against most wedges, nice traction
Weakness - Exposed (but quite sturdy) tracks might be a weakness
Notes- I designed this robot to be a robot which gains it€™s advantage by driving OVER an opponent, a bit like Barberous. The exposed tracks are the ultimate way to keep in contact with the floor no matter what kind of ramp I drive up, so that if a good rambot or whatever gets underneath me in a threatening way, I can simply go in full reverse and escape. The drum, ofcourse, is a perfect way to hurt an opponent while he€™s underneath you.
Having just received word that not everyone is happy with the downtime this tournament is undergoing, I feel I have to restate my position.
I do not have writers block. Writing such a lot of fanfic recently has caused other projects of mine, namely a book I wish to get published, to be put on the back burner. Although I enjoy writing the NSBFL, my book is far more important to me, and its that Im concentrating on.
NSBFL X-2 will be kicked off when I feel Ive done enough work on the book for the time being.
Dropping Aquarius VS Ringwraith since A: I dont think RIch will ever respond to the challenge, and B: Myself, andy, and Steve are requesting a Melee between:
MSSD
Tails
Knuckles
Robotnik Twins
Im sure you know where my stats are [on this page] And Andy will post a link to knuckless stats in a bit.
Ground Clearance - 0 underneath skirts and at the front, 8 mm anywhere else
Power - 2x Etek motors at 48 volt
Movement - Four wheels, 20cm diameter
Turning Circel - Zero
Weaponry - It has a broad hydraulic lifting arm which can easily lift 200 kg. To easily get underneath an opponent, it has two lifting plates at the bottom of the arm, one on the left end and one on the right end, instead of one large lifting plate like Behemoth.
Between the two plates, in the centre of the scoop, I mounted a vertical diamond edged Pussycat-style blade, powered by a S28-150 Magmotor, spinning upwards at approximately 3000 RPM, which will hopefully rip off some armour, or more likely, a tire, while lifting an opponent. Jamming a blade into an opponent while lifting it hopefully provides as much control over an opponent than a Behemoth-style grabbing claw/axe can, and it€™ll surely do more damage. (To avoid confusion, the blade is actually part of the lifter, so when the lifter moves up, the blade moves along).
On both sides of the bots is a pair of 5 mm titanium skirts, to make sure I won€™t get flipped very often, as hydraulic srimechs just aren€™t as fast as pnuematic ones.
Armour - 6 mm titanium all around
Srimech - The lifter self-rights the robot when needed
Strenghts - Nice weapon synergy, high traction
Weakness - Hydraulic srimech might prove to be slow
Comment