If this is your first visit, be sure to check out the FAQ. You may have to register
before you can post: click the register link above to proceed. Please email info@fightingrobots.co.uk if you have any questions.
Somewhere within 1.1-1.5 times the body diameter, then it will hit opponents. Width...make it at least 5-10cm. That should be good. Thickness is alright.
Name: Sir Spinalot
Weight: 100 KG
Shape: Circle
Color: Light Blue with a painted USA flag
Dimension: 800mm x 800mm x 120mm
locomotion: 4 foam-wheels, the wheels are 4 x s28-400 magamotors with 8 x v24 3600ah battery packs
ground clearance: 10mm
speed: 20mph
Armor: 5mm titanium armor
weapon: 1500x75x10 titanium spinning bar that runs 1000 rpm with 4 x s28-400 magamotors
sri-mech: yes, the self-righting bar is a electric linear acutator that is on top of Sir Spinalot
Strength: powerful weapon
weakness: vulnerable when weapon is disable
A titanium spinning bar with dimensions 1500mm x 75mm x 10mm, will weigh approximately 4.9kg. Going at 1000rpm, it will produce 5.1kJ.
Andre, I think you should lower the amount of Magmotors you have powering your weapon and your drive. 2 S28-400s for drive and 2 for weapon, not 4. It will give Sir Spinalot close to around 10-15mph (pick a speed in-between). Also, your bar should spin at 3000rpm instead of 1000rpm. That will produce about 45.9kJ, which is quite good for a rookie vapourbot.
Name: Sir Spinalot
Weight: 100 KG
Shape: Circle (Like the Revolutionist)
Color: Light Blue with a painted USA flag on top of Sir Spinalot
Dimension: 800mm x 800mm x 120mm
Locomotion: 4 foam-wheels, the drive runs with 2 S28-400 magamotors with 8 v24 3600ah battery packs
ground clearance: 10mm
speed: 15 mph
Armor: 5mm titanium armor
weapon: 1500x75x10 titanium spinning bar the runs 3000 rpm with 2 s28-400 magamotors
sri-mech: yes, the self-righting bar is a electric linear acutator that is on top of Sir Spinalot
Strength: Powerful Weapon
Weakness: Vuluerable when weapon is disable.
Comment