Team Saint Robot Builds

[craig_colliass]

Gareth
You did OK but we won on style and about 26 hits also this fight was just a test.
Max
The sword has damaged some machines when swung by Saint Eruption for one. The drive/weapon motors amount to about 5,200W of power this is similar to Titan, With the armour these days even Thor has problems damaging some robots. the days of really bad damage are over, until the spinners are let loose but that is not going to happen, so hitters have to go on points. the weight of Gabriel is probably just over 100KG

[daveimi]

This is soooo cool. Saint was a lot scarier in the flesh that it was in the videos. When you stand next to the arena and Saint's hammer came down on the floor the whole place shook!

[craig_colliass]

Some pictures of the build of Gabriel

The chassis is in effect 2 angle strips that separate the motor plates, they in turn hold the stub axles. the ribs are in place the centre ones will carry the load of the sword impact. The outer ones hold the armour front panel on.

2013-12-09 11.44.02.jpg

2013-12-09 11.44.07.jpg

The motors and front armour fitted as a whole the structure is now much stronger the front armour is 6mm thick steel armour. as you can see there is not a lot of room in this robot.

2013-12-22 11.58.12.jpg

2013-12-22 11.58.22.jpg

2014-01-11 11.10.44.jpg

Hope you enjoy the pictures

Craig

[harry hills]

I do enjoy the pictures and would love to see some more

[teamstorm]

Just caught up with this, wow, Craig that's *huge* how are we supposed to fight that, Storm II will just drive straight underneath !

[craig_colliass]

OK I will probably finish talking about the initial robot build for Gabriel with these pictures.


As you can see the speed controller (the Wotty) is mounted between the motors and has a large heat sink fitted to it as in these robots the speed controller can get quite warm! the position of this component is important I wanted it to be within the minimum inertially stressed place when as it were "The hammer falls."
you can see strapped to the motor assemblies the boxes that I was going to use for the batteries, in the end I considered this part of the robot to have too much inertial loads for fragile LiPo batteries, the final position was changed.


IMG_0392.jpg

IMG_0395.jpg

IMG_0393.jpg


cutting the plastic for the top and bottom armour was harder than I thought as it had to be quite accurate to fit the front armour.

IMG_0381.jpg

IMG_0383.jpg


these are for my next project

IMG_0490.jpg

IMG_0491.jpg

[Porker]

What is your next project?

[craig_anto]

You are not allowed to join the pneumatic darkside Craig, I will not allow it

[craig_colliass]

Dark indeed Craig!!

I think I should do something pneumatic just to show I can, but it will have the Team Saint touch !
(by that I mean it will be fiendishly clever, with ideas no one would want to use, or no one will understand why I bothered. and it won't win!)

I have a feather (that won't win either ) I was going to finish as well I don't know what to do first!

[craig_anto]

I'm hoping this is some kind of walking monstrosity if not you're not going to like what I'm leave in your tool box at the next event

[craig_colliass]

Craig

A walker!!

"You might think that, but I couldn't possibly comment"

[craig_colliass]

The conversation whent something like this.

Me "Now Zack don't go on the floor flipper as the gearboxes are weak and may break"
Zack "OK dad don't keep pestering me about it"
Me "Zack why is Seraph just going round in circles?"
Zack "I don't know dad"

IMG_0507.jpg

Thanks to mike I now have some Zack proof gearboxes to replace the old ones, so Seraph will be back to do it's thing, till the next time Zack finds the weak spot.


IMG_0505.jpg

IMG_0506.jpg

[daveimi]

This made me laugh!

[craig_colliass]

The Burgess Hill event

Thanks to Alan and all the Robots Live team for a great weekend.


The robots

Gabriel didn't shine much, the first fight it broke one of the drive motors and that was it's weekend! After taking the motor apart, it looks like the armature is damaged and has lost power I will have to get this fixed, also the drive on the other wheel has tightened up again! I will be looking at this problem too.
I have decided to replace both motors for new units this way I have a firm base to develop the transmission and ensure reliability. the old motors will get re wound in the future.

Saint went well had to tighten up a few bolts through the weekend, but it just kept going, I am going to do some maintenance on it. So far I have taken one drive out and striped it down. When it was built the stub axle was going to be welded to the main plate I suppose I will have to do that also the drive bearing on the transition shaft fails regularly so modifications to this is also in the pipeline.

Cherub as bad as it was last event, it was good this event, it was runner up! that's the best result Team Saint has had. no work really required here! I will just take off the lids and give a few bolts the spanner treatment.


Feathers Tron worked faultlessly shame about my driving.
Seraph one of the "new gearboxes" seized up I think it couldn't take the excitement, I will be taking that apart and reporting on the Team Saint build thread shortly. Haven't looked at Seraph will try to get it going for the next event if I can

Kettle Bot Worked fine hope to sort out the steam function soon.
will keep you up dated on that.

Craig

[daveimi]

Do you find that you're gearboxes take a battering with the large wheels and everything? Erm, I mean with the size of them/pressure on the hubs and stuff? Can't decide whether to leave wheels exposed or not on our ramshackle rubbish heavy lol. Really digging your robots.