Robo Challenge - 2013 FRA UK Featherweight Championships!

[mattsdragons]

Re: Robo Challenge - 2013 FRA UK Featherweight Championships

What thickness bulkheads are you using on conker?

[ady]

Re: Robo Challenge - 2013 FRA UK Featherweight Championships

Nice looking spinner, with good drive too, staying up rite it will be a good contender

[Eventorizon]

Re: Robo Challenge - 2013 FRA UK Featherweight Championships

Name: Conker II
Weight: 13.59Kg
Drive: 4X GR01 @ 14.8V
Weapon: 1.4kg 200mm Disc, 2 Speed 900BB @ 37V
Armour: 2mm Titanium Grade 2 Annealed [F&S], 2.5mmm Titanium Grade 6 Annealed [B]
Chassis: 2mm Titanium Grade 2 Annealed Base, 10mm & 8mm HDPE
Notes: Cost ~£800 to build
[attachment=0:1t59ckva]20121214_153301.jpg[/attachment:1t59ckva]
Name: Binky
Weight: 13.45Kg
Drive: 2 GR02 @ 14.8V
Weapon: 3.58Kg 270mm Disc, HK-4035-630Kv @ 37V
Armour: 2mm Titanium Grade 2 Annealed
Chassis: 2mm Titanium Grade 2 Annealed, 3mm 1060 Aluminium, 6082 Aluminum Blulkheads
Notes: Untested in combat but made a complete mess of a Belling Mini-Cooker

[Anttazz]

Re: Robo Challenge - 2013 FRA UK Featherweight Championships

yup, will need to make a feature of the flag. Just remembered that the last time it was at GSL it wasn't painted was it? Suppose it is a bit different now then.

[plargen]

Re: Robo Challenge - 2013 FRA UK Featherweight Championships

Name: scruffy
Weapons: lifter
Armour: 5mm mild steel, 4-5mm aluminium lid
drive: 2x drill motors at 14.4v
Notes: if it comes back in a bag i will be surprised but i can then make its replacement




my other half will probably be driving Night Fury

Name: Night fury
Armour: 8mm mild steel round the sides 3mm base and a 5mm aluminium top
Weapon: scoops on front and kebab meat spikes on the back
Drive: 4x drill motors on a 4s lipo
Notes: if i loose the spikes i have no spares lol

[PJ-27]

Re: Robo Challenge - 2013 FRA UK Featherweight Championships



Ok, the one with the Scottish flag painted on it!

[Anttazz]

Re: Robo Challenge - 2013 FRA UK Featherweight Championships

Eric Jr2 - Tony's flipper made from the old Rip chassis
Cicatrix - Tony's 4WD ram bot that always breaks down.

1. Correct, FP now though
2. Since the second battle of the 2011 UK Champs Cicatrix has still been running at the end of every battle

Will get some photos up when I have some, Cicatrix still looks exactly the same though

[mattsdragons]

Re: Robo Challenge - 2013 FRA UK Featherweight Championships

Name: Turisas
Weight: 13.6kg (I hope)
Drive: 6wd from two 12v drills at 18v on timing belts
Weapon: Vertical disk with A28-400 mag or Box Rammer
Notes: Interchangable and probably will be too heavy, but give it a go

[botmad]

Re: Robo Challenge - 2013 FRA UK Featherweight Championships

Name: Tilly's Revenge
Weight : 12.6 ish
Weapon: 4WD pusher
Armour: 3mm mild steel
Drive 4x team wyhachi 12v motors
Picture: on shane's facebook

[razerdave]

Re: Robo Challenge - 2013 FRA UK Featherweight Championships

Ed: not saying its your fault you have pulled out before, just unfortunate . Just hoping you won't have to this time, I for one would love to fight Vortex

[psychostorm]

Re: Robo Challenge - 2013 FRA UK Featherweight Championships

Name - Kaizer
Weapon - Actuator powered electric lifting forks, similar to Panic Attack
Armour - 10mm HDPE sides, Steel front
Drive - 18v drills x4, running at
24v.
Other - Only Welsh representative. Proud of paint job.

[james...venom]

Re: Robo Challenge - 2013 FRA UK Featherweight Championships

Looking forward to seeing Vortex running, think it will be very competitive. What have you done to get it up to weight then Ed?

[PJ-27]

Re: Robo Challenge - 2013 FRA UK Featherweight Championships

BitzaWood Revo
Vertical disc made from the master cam pulley from a V6 Mondeo!
Chassis made entirely from MDF, with Stainless overlay for the champs.
Mini Cam installed for 'Bot's Eye View'

[teamstorm]

Re: Robo Challenge - 2013 FRA UK Featherweight Championships

Yes Vortex is Storm Vortex - 10 years old !

http://www.teamstorm.com/feathers/vortex.htm

@razerdave it's never our intention to pull out but sadly work commitments come first as that's what pays for the robot habit ! Just the nature of my work, in Ghana last week Vegas this week !

[Ellis]

Re: Robo Challenge - 2013 FRA UK Featherweight Championships

Name - Tormenta 2
Weapon - double action electric lifter/flipper, similar to Sewer Snake's
Armour - All hdpe: 10mm sides, 7mm back, 6mm top
Drive - 12v drills x4, running at 18v - results in great drive when it isn't broken :wink:
Other - the forks are horizontal spinner bait, please be nice!!!
Pictures - http://i1088.photobucket.com/albums/i32 ... 012609.jpg
(sitting next to Tormenta, our entry last year, came 26th, haha) http://i1088.photobucket.com/albums/i32 ... 012612.jpg

Name - (*unnamed* in the list) now named Grabbererer
Weapon - a grabbererer
Armour - currently 10mm and 20mm HDPE
Drive - 18v drills x2
Other - not started building it yet
Picture - tis a sekrit