Crash & Burn: Mini-Tournament of Death 3

[swanaldo]

Re: Crash & Burn: Mini-Tournament of Death 3

I will enter Envy please. I think you know the stats

[kodster]

Re: Crash & Burn: Mini-Tournament of Death 3

I do indeed. Thanks very much, Swanny.

Entrants
Gabriel V (Joey)
Minesweeper 1.1 (Mark)
Qwertyuiop (Navaha)
CrOokEd (Jack)
[reserved] (Andy)
Envy (Shane)

10 more spots.

[samuel3764]

Re: Crash & Burn: Mini-Tournament of Death 3

I'll enter Next Stop Jupiter.

Weight: 100kg
Shape: Warrior SKF, with a wedge extension on the front.
Colour: Colours of the planet Jupiter, duh.
Dimensions: 100 X 81 X 21 cm
Power: 2 X LEM-130's @ 36v, powered by several NiCad Batteries, shock-proofed.
Wheels: 2 X Aluminium Wheels with Urethane Rubber for superb grip
Armour: 3.5mm Hardox for the wedge, 7mm Ti/V for top and bottom, 5mm hardox for the rim
Speed: Roughly 13 mph
Ground Clearence: Obviously 0mm for the front, and 6mm for anywhere else
Turning Circle: Zero... how many times do I have to tell you guys?!
Weapon: A nasty 27kg spinning rim powered by an LEM-130 Lynch, and spinning at 2000RPM. It also has 8 X hardox teeth on board. (Four on top, Four on Bottom) The rim can deliver some VERY nasty damage to another opponent. It can slice through titanium, and dent hardox without any problems. The motor is shock-mounted, to avoid killing itself from its own hits. The rim can also transfer its energy to the front kinetic flipper, thanks to a clutch. This flipper has a wedge extension which is nearly impossible to get under. The flipper can also throw robots with HUGE force. Can you say, OOTA?!
Srimech: Yes, it can run inverted... BUT the flipper can right the robot if needed.
Strengths: Can cause some EXTREME damage, Powerful Flipper, Shock-Proofed, A good all-rounder.
Weaknesses: A bit slow

[corsair_lightning]

Re: Crash & Burn: Mini-Tournament of Death 3

Sorry, I screwed up on the stats again.

Minesweeper 1.1
Weight: 100kg
Shape: Tornado (S7)
Colour: Gold on top and bottom, Silver on the sides, with MINESWEEPER written on the sides in red. The scoops are bronze.
Dimensions: 90cm x 85cm x 25cm
Drive: 2x 36v LEM-130 motors, powered by 8x A123 Battlepacks. The motors power all 4 wheels via a belt system.
Locomotion: 4 Titanium/Vanadium alloy wheels with Vulkanized rubber tyres.
Armour: 6mm Hardox monocoque
Speed: 22mph
Ground Clearance: 0mm at front and back due to scoops, and 5mm at sides.
Turning Circle: 0m
Weapon: 2 solid Hardox snowplow-like scoops that can move slightly vertically, like Behemoth's, so I get good pushing power, but 0mm ground clearance at front and back. The robot also has a bunch of shockproofing around the belts, electronics, and motors, due to the fact that it was originally designed as a spinner killer/rambot.
Srimech: Invertible
Strengths: Super-reliable and fast. Good pushing ability.
Weaknesses: Not too much of an offensive weapon.

[swimm3r]

Re: Crash & Burn: Mini-Tournament of Death 3

I'll enter Apocalypse II, stats in C&B4

[team_britespark]

Re: Crash & Burn: Mini-Tournament of Death 3

Monsoon Season, SVP. Stats here: http://strickenone.proboards.com/index. ... thread=305

YAY!

[dinowarrior]

Re: Crash & Burn: Mini-Tournament of Death 3

I'll go about entering Die-Reverta-Tops...I trust you know where the stats are. :wink:

[majinb]

Re: Crash & Burn: Mini-Tournament of Death 3

I will enter Under Pressure! http://strickenone.proboards.com/index. ... =thvapours

[steven_mcg]

Re: Crash & Burn: Mini-Tournament of Death 3

Mornington Crescent for me, please!

NAME- Mornington Crescent (HW)
SHAPE- flat cylinder
COLOUR- white, with the London Underground sign for Mornington Crescent on the top and bottom
WEIGHT- approx 100kg
DIMENSIONS- 100cm X 20cm
SPEED- 12mph
TURNING CIRCLE- 0mm
GROUND CLEARANCE- 8mm
ARMOUR- 3.5mm Hardox
MOVEMENT- 4 x inner wheels
POWER- 2 x S28-400 Magmotors, running at 24v
WEAPONS- Mornington Crescent is armed with not one, but TWO outer spinning rings, one on top of the other. The top ring spins anticlockwise, while the bottom ring spins clockwise. Each ring has four teeth and weighs about 10kg. The rings are powered by an LEM-130 running at 36v each and can reach speeds of 1500rpm. The two rings spinning in alternate directions should also help the robot be easier to drive - theoretically, anyway.
SRIMECH- invertible
NOTES- flies Scotland flag, thanks to Joey and Andy for helping with stats
STRENGTHS- two spinners for the price of one, nippy, manoueverable, tough, more controlled than regular ring spinners
WEAKNESSES- wheels open to axes and crushers, unpredictable bouncing?
PIC- http://img25.imageshack.us/img25/5661/m ... escent.bmp

[andrewj]

Re: Crash & Burn: Mini-Tournament of Death 3

I've decided to go for The Final Cut.

Also, Paul wishes to enter Nitro-Gene 5.0.

[kodster]

Re: Crash & Burn: Mini-Tournament of Death 3

Entrants
Gabriel V (Joey)
Minesweeper 1.1 (Mark)
Qwertyuiop (Navaha)
CrOokEd (Jack)
The Final Cut (Andy)
Envy (Shane)
Next Stop Jupiter (Samuel)
Apocalypse II (Liam)
Monsoon Season (Daniel)
Die-Reverta-Tops (Chris)
Under Pressure (Martijn)
Mornington Crescent (Steven)
Nitro-Gene 5.0 (Paul)

3 more.

[Bblader]

Re: Crash & Burn: Mini-Tournament of Death 3

Lethal Weapon for me.

Kody, I trust you still have the stats?

[kodster]

Re: Crash & Burn: Mini-Tournament of Death 3

Not on either computer, but they're on ZED, aren't they? I seen 'em there. So I'll use those.

2 more people needed! Then this can get underway.

[leorcc]

Re: Crash & Burn: Mini-Tournament of Death 3

I'll enter Symmetry:

http://www.insaneclown.nl/vapourbots/showrobot.php?id=3

[corsair_lightning]

Re: Crash & Burn: Mini-Tournament of Death 3

I probably don't need to say this, but...

Leo, do you remember Liam's Mini-Tournament? You entered Symmetry, and I entered Minesweeper!