Eye Of The Robot - Series 3 (My first real tornument!

[paulc]

Eye Of The Robot - Series 3 (My first real tornument!&#4

That minor issue has been rectified. I just need to know the vapourbots for team Devils Incarnate youre going to be entering. When I get the robots for Matt, AJ, Martyn and the remainder of Stats from Kody then we can launch this thing into space!

[davids]

Eye Of The Robot - Series 3 (My first real tornument!&#4

Excellent

[kodster]

Eye Of The Robot - Series 3 (My first real tornument!&#4

Paul, Tim, Leo, thank you.

Leo, to answer your question, the side isnt really flat, but curved slightly (the bottom edge sticks out more; will produce another CAD if necessary) so if that happens Wedginator can self-right directly from its side (spinning as it does so).

The Zenith and Aftershock will be coming, stats and all, in a little while.

(Message edited by kodster on January 13, 200

[leorcc]

Eye Of The Robot - Series 3 (My first real tornument!&#4

I dont remember asking a question but ok.

[kodster]

Eye Of The Robot - Series 3 (My first real tornument!&#4

Oh wait, thats Jamie. Oops.

Sorry, Leo. Eternia looks awesome btw.

Okay, I answered JAMIES question.

[kodster]

Eye Of The Robot - Series 3 (My first real tornument!&#4

Last two!

The Zenith

Shape: See picture.
Colour: See picture.
Speed: 15mph
Weight: 100kg
Armour: 6mm hardox ring; wedges are 9mm titanium: the top srimech is 10mm polycarbonate.
Drive: 2 LEM130s @ 36v.
Power: 6 NiCad Battlepacks @ 36v.
Motivation: Four small Biohazard style wheels with Vulkalon rubber for grip.
Ground Clearance: 5mm under the ring, and 0mm at the wedges.
Dimensions in CM (LxWxH): For the main body its 80x80x15. Add the wedges and you get 20x120x15
Weaponry: Shell that is powered by a LEM170 motor @ 48v, running at 3000rpm, producing 55kJ of force per blow. Borrowed from superheavyweight S.L.A.M., are four wedges attached to the lower half of the shell, 90 degrees to each other. designed to throw robots across the ring when coming in contact, and OOTAs are definitely feasible. 3 hardox teeth inserted into each wedge will strip off some armour too, or even break it.
Srimech: The 10mm polycarbonate top panel pops up, thanks to a 80mm rod and a 2kg CO2 tank, which should right the robot about 25-30 times in a fight.
Strengths: Can throw and damage at the same time. Fast for a FBS. Fast srimech.
Weaknesses: Can be gotten under easily if wedges are avoided. Average top armour.

Aftershock

Shape: Horizontal cylinder
Colour: See picture
Speed: 10mph
Weight: 100kg
Armour: The drum and hubs are 9mm titanium.
Drive: 2 S28-150s, 24v.
Power: 4 NiCad Battlepacks, 24v.
Motivation: Two large packed-tight-with-foam tires, like Overkill just less wide. They are very tough even against disc weapons.
Ground Clearance: 5mm
Dimensions in CM (LxWxH): 95x40x40
Weaponry: The 15kg drum and 5kg hubs are all weapons here. All spin independently through one LEM130 motor each: the hubs have 2 hardox teeth while the drum has 10. The drum spins at 2000rpm and dishes out 40kJ, while the hubs spin at 3500rpm and dish out 30kJ.
Srimech: Invertible.
Strengths: Destructive, tire weakness is very hard to exploit, flipping it does nothing. Tough armour.
Weaknesses: Kinda slow, tires exposed.

Pics:

The Zenith - http://www.geocities.com/origkody/TheZenith.pnghttp://www.geocities.com/origkody/TheZenith.png
Aftershock - http://www.geocities.com/origkody/Aftershock.pnghttp://www.geocities.com/origkody/Aftershock.png

Will that suffice?

[paulc]

Eye Of The Robot - Series 3 (My first real tornument!&#4

It certainately does suffice

I only need robots now from Matty, AJ and Martyn to get going.

[davids]

Eye Of The Robot - Series 3 (My first real tornument!&#4

Im making some tiny adjustments to my 8th robot, with an idea Ive had in that how can I improve thread.

I shall have the new stats up later

[dogbot4000]

Eye Of The Robot - Series 3 (My first real tornument!&#4

Woah Kody Aftershock looks like Barberouss older brother and The Zenith looks like a more kill-worthy megabyte and thats saying something.

[davids]

Eye Of The Robot - Series 3 (My first real tornument!&#4

Flipping Mad
Mass - 98 Kg ish
Shape - Box, with skirts, and a wedged front
Colour - Unpainted sides, with a thin layer of black paint on the top.
Speed - 25 mph MAX, although 15 mph is the normal speed, just has that little bit more speed to get out of sticky situations.
TURNING CIRCLE- 0, it uses skid steer
GROUND CLEARANCE- 30mm at rear to 0 at front, reduced to 0 mm on the sides and rear with skirts.
ARMOUR - 6mm titanium shell, attached to a tubular steel chassis with pieces of rubber mounted at locations for shock protection.
Skirts - Simple skirts, which can be removed pending on the battle, the base of the skirt (the part which touches) the ground has some of that hard-wearing paint on it.
WHEELS- 4 wheel drive, giving power from the Bosch 750 drive at 36 volts, think Tornado, the wheels are modified steel wheels with a solid hard rubber outside part.
WEAPONS- A rear-hinged flipping arm, powered by a co2 bottle for 1 piston, has enough power for about 30 flips. The 2nd weapon can be attached to the front wedge, it€™s a sprung wedge, sprung so that it forces the wedge tip into the ground, the strength is that it will be harder to get underneath, hopefully giving me an advantage, but the weakness is that when the wedge is down, the machine€™s top speed is limited as the wedge destroys the arena floor, there is a little lego-style motor which can raise the wedge slightly if needed.

If the sprung wedge is not needed (for example coming up against a robot where it will prove as a weakness rather than strength), the whole lot can be replaced with a bog standard wedge, where the flipper sits down flush, but in reality most of the time I will be using the bog standard wedge, but the sprung is in my weaponry if it€™s needed.

SRIMECH- flipper will be used to self-right it
NOTES- Flipping Mad, older than life, based on the very old flipping mad mark 1 chassis. Let€™s see if the old dog has some tricks left in it.
STRENGTHS- 4 wheel drive, flipper, good driver who knows how to power slid
WEAKNESSES- Was around before the dawn of time, it€™s based on old school technology.

Just really stuck a torsion wedge in the box, chances are that it wont be used, but if both machines are close on paper it might prove to be an advantage, but meh.

[kodster]

Eye Of The Robot - Series 3 (My first real tornument!&#4

Uh, thanks Tim.

[paulc]

Eye Of The Robot - Series 3 (My first real tornument!&#4

Im not meaning to be annoying, but I need to press some people for stats, mostly Martijn and AJ as they were the one to sign up first, but I also need entries from Martyn and Matty.

Just to tell you

[dogbot4000]

Eye Of The Robot - Series 3 (My first real tornument!&#4

I think this is why Frank used to not reserve places for AJ.

[pcbore]

Eye Of The Robot - Series 3 (My first real tornument!&#4

Pretty much, yeah.

[paulc]

Eye Of The Robot - Series 3 (My first real tornument!&#4

Now, Ive decided to do something about these unfilled spaces. Entries who havent got ALL of their entrants in have 4 more days to get them in, or Im cancelling the reservations:

So...

AJ
Martijn
Matty
Martyn

You have 4 days to get ready or your reservations are erased. This goes for anyone who enters if the spaces are cleared - you have 4 days from the day you reserve a place to get your stats in.

PS. Please dont make me get rid of spaces.