featherweight flipper systems

[Danjr1]

Re: featherweight flipper systems

I've got in touch with Trevor so all is good!

I'm having trouble sorting out the thread sizes etc. I have the tank below (with an on off valve and I'm guessing a standard paintball tank thread) and the solenoid valve. I'm confused about the thread sizes etc (will I need adapters etc) and I'll be using the trev reg

http://cgi.ebay.com/PURE-ENERGY-16oz-Co ... 0385014232

http://cgi.ebay.co.uk/Pneumatic-5-2-Sin ... _558wt_922

[Danjr1]

Re: featherweight flipper systems

Also, how much does a trev reg weigh?

[maddox10]

Re: featherweight flipper systems

a lot less than any commercial version.

[Danjr1]

Re: featherweight flipper systems

I can imagine! But seriously, does anyone know?

[harry hills]

Re: featherweight flipper systems

not enough to matter probably

[jonny]

Re: featherweight flipper systems

i've weighed one but i can't remember how much they weigh . i don't think they are more than 300g

[Danjr1]

Re: featherweight flipper systems

I'm going to be so borderline on weight it's unbelievable!

[maddox10]

Re: featherweight flipper systems

I can imagine! But seriously, does anyone know?

My Trevor, without CO2 nut, is 112 gram. And I guess I can remove a few more grams if needs be.

[Danjr1]

Re: featherweight flipper systems

Thank you, I've got all the parts on order now so when they all come through, I'll weigh the whole lot. If it's over, think I'll be dropping down to 2wd and hacking two corners of the chassis off!

[Danjr1]

Re: featherweight flipper systems

Just about to order my push fits from technobots and I want to double check a few things. If I want to order a stud for a Trevor reg and I'm using tubing with a OD of 10mm, I'd want a 1/8 10 BSP stud correct? And the solenoid valve is 1/4 BSP so I'd want 1/4 BSP 10 items?

[woody]

Re: featherweight flipper systems

YES

[Danjr1]

Re: featherweight flipper systems

Thanks