Featherweight Database

[glen]

Featherweight Database

robot name: Kang

Power: 1x 12v cp2400scr nicad pack and 2x resoldered 12v drill packs

Drive: 2x 12v Drill Motors/gearboxes at 12v with 125mm wheels and a hub made from the guts of a drill chuck.

Controller: two 12amp custom made drill trigger servo controllers.

Weapon: 240mm saws, either 72 tooth or 50 tooth version powered by an ev warrior size motor at 24v (has a flat plate on it). speed is about 5000rpm ~

Armour: 10mm 5083 aluminium lid with 4mm steel armour, 10mm lexan in low stress areas

Frequency: 29.885MHz with a silvertone (http://www.silvertone.com.auwww.silvertone.com.au) military reciever

Status: just needs armour.

piccy of the early version with no armour or batteries mounted (and old version controllers) http://www.robowars.org/forum/album_pic.php?pic_id=606http://www.robowars.org/forum/album_pic.php?pic_id=606

[armadrillo]

Featherweight Database

Robot Name: ZERO

Drive: 2x 12v Drill Motors/gearboxes at 12v with 150mm wheels and a hub made from the guts of a drill chuck.

Controller: 2 x electronize 15A and mixer

Weapon: 2.5kg spinning drum powered by 12v drill motor. Approx speed 4000rpm.

Armour: 5mm Ali with 3mm polycarb on top.

Chassis: 15mm S/S box

Status: just needs Electronize and weapon wiring completed

I will be taking ZERO to Brighton on Sunday to gage reaction and get some feedback then will be looking to get to live events! Hoorah!

[armadrillo]

Featherweight Database

Sorry Pic of ZERO on profile.

[Mouldy]

Featherweight Database

Got some of my CNCd components now- pics on profile.

[robjones]

Featherweight Database

Zero looks great Glen. Look forward to seeing it at Sheffied.

[robotic_ants]

Featherweight Database

Hey if Zeros going to Sheffield it can meet up with Conundrum Mk1. Zero looks like a good base to start with, wish i could have built mine as good as Zero.

Chris - http://www.featherweights.org/forum

[graeme]

Featherweight Database

Robot name: Little Hitter

Power: 1x NimH pack 33.6volts +600g C02

Drive: 2x 30v Drills motors 75mm dia wheels

Controller: 1 Technobots h bridge dual channel.

Weapon: Pneumatic axe. 80mm bore 50 stroke 16 bar ram(mounted vertically), paintball reg and buffer tank. 12mm pipes + 1/2BSP valve(3/2).Axe Shaft+head grade 5 ti.

Armour: 1.5 mm front, 1.2mm sides, 0.6-1.6 back all grade 5+ ti.

Chassis: 30mm nylon milled to 8mm in middle.

Weight: 12KG

Status: Finished. Going to sheffield.

Pic on profile

[graeme]

Featherweight Database

Robot name: Little Flipper

Power: 1x NimH pack 19.2 volts +600g C02

Drive: 2x 12v Drills motors 75mm dia wheels

Controller: 1 Technobots h bridge dual channel.

Weapon: Full pressure flipper. 50mm dia 60mm stroke hydraulic ram.1/2inch Burket,enough pipework for buffer/area of ram.

Armour: 1mm - 1.5mm all round,1.5mm where electrics are. 3mm flipper. All grade 5+ ti.

Chassis: 12mm Nylon + 0.6mm ti.

Weight: 11.9 KG

Status: Finished. Going to sheffield.

Pic on profile

[erik_knutsson]

Featherweight Database

nice

[dragonmaster_1]

Featherweight Database

2 new feathers building. (1) Noname. 18v drill motors for drive. linier actuator with a 400kg pull/push for lifter. 2 x 12v 3000 nicads 2mm stainless steel and 4.5mm polypro armour. Will be at Magna.
(2) Ram bot with wedge Gold motors 6-1 reduction chain drive. 2 x 12v 3000 nicads. polypro and steel armour.

[wenman]

Featherweight Database

Im just starting the build of my new robot a push bot feather weight this time. See pic on profile.

Robot Name: Dont know yet havent decided. Maybe Mini Mayhem?
Power: 24V 3Ah NiCads
Drive: 2 drill motors powering 4 80mm dia wheels
Steering: Traditional skid steer
Armour: 3-5mm thk steel
Status: Design complete just starting build.

Richard
Team Mayhem

[wenman]

Featherweight Database

Oh forgot

Speed controller: IBC
Features: Drive train suspended from body to allow adjustment of scoop height & protect from distrotion in chasis.

Richard
Team Mayhem

[ewan]

Featherweight Database

pics look very good

[team_ireland]

Featherweight Database

Flipper
Current Version
Speed: 14Kph
Power: 1x 14v 3000mAh soldered NiMH Pack
Drive: 2x 9.6v Drill Motors
Controller: 2 x 30amp Electronize with external Relays
Weapon: High flow rate low pressure 10bar Pneumatic Flipper
Armour: 6&10mm Polycarbonate
Frequency: 40.685MHz
Status: Complete, Pic on Profile

Flipper
Upgraded Version (Parts are here but are not in the robot yet)
Speed: 18Kph
Power: 1x 16.8v 3300mAh soldered NiMH Pack
Drive: 2x 12v Drill Motors
Controller: 2 x 30amp Electronize with External Relays
Weapon: High flow rate low pressure 10bar Pneumatic Flipper
Armour: 6&10mm Polycarbonate
Frequency: 40.685MHz
Notes: Should drive in a Straight Line!
Status: Needs to be assembeled.

[dragonmaster_1]

Featherweight Database

Latest pics of noname on profile