No Toy Robotics

[adz600]

http://www.ebay.co.uk/itm/2009126068...84.m1423.l2649

[Ellis]

Theoretical top speed of almost 18mph. Much more reasonable. Don't know much about that model of 900, chances are they're all torque (especially at double nominal voltage), as they're very low revving, in which case you should be fine.

[razerdave]

They look to be the legit versions: longer can, seem to have the internally mounted capacitors.

[adz600]

http://www.technobotsonline.com/gear...del-gears.html
these gears look good value and very light, anyone used them

[Ellis]

Generally seems the tooth width is just 4mm. That's very small for a feather drive. I'd expect those mega motors to devour them.

(never seen them on there before though, nice for beetle scale!)

[maddox10]

Those are heavy duty model gears, they are used with 3kw+ inrunners.
Of course, those won't survive more than a few runs.

For the first stage , it's useable, the second one is another matter.

[adz600]

Happy Xmas to you all, thanks for everybodys help and advice and a special mention to Trev also, hopefully will be at many more shows next year, and remember boxing day is for robot building not shopping all the best Adam and louise

[adz600]

are these good beattle weight motors, including hub and banebots wheels
http://www.ebay.co.uk/itm/3307516820...84.m1423.l2649

[harry hills]

Yeah I think those are the exact same ones I linked the other day lol

[adz600]

Anybody in the notts area who could do some ali welding, need the flip arm plate welding on and some fins.

[adz600]

Ceros update all finshed bar some welding, and full weapon test

weight 88.2 kg with 1 bottle and no gas, so plenty of weight left for the hardox scoop

yay, will post some photos

[RogueTwoRobots]

Sounds good, and well done on the effort of giving it an overhaul!
Looking forward to pictures/videos.

[Max]

Wiring up my weapon control, technobots twin relay got it set too oposite controls, ie ex open inlet closed
using my rudder stick but it seems slow and when link is in the exhaust opens with or without bec on, this is safe but is it correct
anyone post pics of there fire control designs

Presumably your running 36v, does the technobots relay cope with that alright as it says its max 30v?

[adz600]

No only running 6s 22.2v but I use acl valves for the inlet rated 12v coils and burkett exhaust 24v coil

[adz600]

New flipper bar and chassis brace