If this is your first visit, be sure to check out the FAQ. You may have to register
before you can post: click the register link above to proceed. Please email info@fightingrobots.co.uk if you have any questions.
Ewan: Im afraid I am running my robot on 24v, so an 18v LED is not gonna handle it (although some of the more educated people may tell me different, can LEDs handle more than they are rated ?)
I have a 12v LED that handles 24v but i dont think its advisable. The only other option is that you can put a resistor inline with the led so the led gets 18v instead of 24v .
Well the panel mount ones with built-in resistor can usually take a few more volts but stick an additional resistor in series to be safe at 24v - quite helpfully as Dave pointed out earlier apparently theres a maplins across the road
Guys, although I am not going to be there, Jenny and Geoff will be coming down with Small Torrque after all. If you need to send any emails you will need to send them to me as J & G are still in transit and have no internet access.
Thanks
Hey guys looking for a bit of help.
I tried to grab a fail safe for my weapon servo from my local model shop but they didnt have one. Was hoping that some one had one spare that i could use for teh event. Would greatly be apreciated.
Cheers
Marco
If anyone would like a FIRST CLASS return from London to Exeter for this event please drop me a mail. I have a return ticket leaving London at 12:35 on Saturday arriving Exeter at 15:03.
The ticket allows you to come back on the 17:52 from Exeter, getting into London at 20:15 on Sunday evening.
Comment