Tweet
For sale we have:
a 4wd invertible featherweight robot featuring:
4x 18v (was to be run at 24V) drill motors attached to argos gearboxes, running full metal internals (1 of the motors sparks for some reason, if you can fix it great, if not i can send you the link to the shop on ebay where i get the drills from. The woman who runs it gives you a discount if you don't need the batteries!)
1x Spektrum DX6I with AR6210 dual-part receiver (in original packaging and with all documentation)
4x Electronize FR30HX ESCs
2x double motor mounts machined by Kenny so the motors sit perfectly level
2x Metal spikes with bolts and washers (just need sharpening up and cleaning). Made by Kenny again. Used them as decoration and to stop the bot sitting on its side. Made from some steel that Kenny said is popular with heavyweights
4x robochallenge 75mm wheels
the chassis is 20mm HDPE, with 12mm HDPE internal bracing. The lids are 5mm ali
1x dimension engineering ParkBEC
2x RC mixers
6x 12v argos motors (two have gearboxes)
1x 24v 4300mah pack vapertech (I think one of the cells has gone so if you can replace it, great. the cells are easily sourced from ebay)
a load of 24v UV 5mm LEDs that have never been used
1x 125A inline fuse
Would like to sell as a job lot but i know the chances of that happening are remote so make offers on what you'd like and we will go from there! It doesn't include the battery i was using or the charger as I'm keeping them for future use.
Im looking for around £400 for the whole lot. Postage, we'll sort out later!
Thanks
Dan
a 4wd invertible featherweight robot featuring:
4x 18v (was to be run at 24V) drill motors attached to argos gearboxes, running full metal internals (1 of the motors sparks for some reason, if you can fix it great, if not i can send you the link to the shop on ebay where i get the drills from. The woman who runs it gives you a discount if you don't need the batteries!)
1x Spektrum DX6I with AR6210 dual-part receiver (in original packaging and with all documentation)
4x Electronize FR30HX ESCs
2x double motor mounts machined by Kenny so the motors sit perfectly level
2x Metal spikes with bolts and washers (just need sharpening up and cleaning). Made by Kenny again. Used them as decoration and to stop the bot sitting on its side. Made from some steel that Kenny said is popular with heavyweights
4x robochallenge 75mm wheels
the chassis is 20mm HDPE, with 12mm HDPE internal bracing. The lids are 5mm ali
1x dimension engineering ParkBEC
2x RC mixers
6x 12v argos motors (two have gearboxes)
1x 24v 4300mah pack vapertech (I think one of the cells has gone so if you can replace it, great. the cells are easily sourced from ebay)
a load of 24v UV 5mm LEDs that have never been used
1x 125A inline fuse
Would like to sell as a job lot but i know the chances of that happening are remote so make offers on what you'd like and we will go from there! It doesn't include the battery i was using or the charger as I'm keeping them for future use.
Im looking for around £400 for the whole lot. Postage, we'll sort out later!
Thanks
Dan
Comment