Announcement

**razerdave** · 4 July 2005, 07:51

The NSTT: Other-weights

MW:
Hell Fire

Weight: 50kg
Dimensions: 120x110x40cm
Shape: low slung wedge
Weapons: Powerful pneumatic flipping arm that has a plate that runs the width of the front, that can throw 75kg 3 feet or so no problem, and can, flip 100kg, but not too high, and a rear Pussycat style Saw, that spins at 4000rpm, and has carbon tipped teeth to cope with titanium.
Top Speed: 25mph
Transmission: a pair of Mag C40â‚¬â„¢s on 24v NiMHâ‚¬â„¢s running through a really simple transmission, but a reliable one due to features to keep the chain on.
Amour: 4mm Ali and steel alloy and 2 mm of stainless steel on top
Strengths: Very manoeuvrable and fast, generally very easy to control
Weakness: Exposed outer wheels
Ground Clearance: 0 at the front, 5cm at the back, varying from 0 to 4.5 at the sides (wedge goes up)
Turning Circle: 0cm (its turning is very nimble)
Notes: Hell Fire is extremely manoeuvrable because it has 2 sets of wheels on the same axle, meaning that itâ‚¬â„¢s incredibly stable, and can turn on a penny, and can still run even with outer wheels ripped off

LW:
Name: Hell Hound
Weight: 25kg
Dimensions (LxWxH): 60x50x30cm
Shape: scooped front, rectangular body, rounded back
Weapons: 2 conjoined Pincer type crushing jaws with a small hydraulic ram powering each, producing a 1 and 1/2 tonne crushing force
Colour: mainly black, but with Rotweiler features all over the body
Speed: 15MPH
Transmission: a pair of Bosch 400â‚¬â„¢s on 24v running through a simple 6:1 ratio gearbox
Armour:1mm stainless steel and 1mm Ali/steel alloy (tough enough for LWs)
Srimech: cable pulled legs from out the side (like a dog cocking his leg to do his business) and a cable pulled tail to self right when its on its head
GC: 0 at the scoop, 2mm the rest of the way
Turning circle: 0cm
Strengths: Power of weapon
Weakness: slow self righter (still effective mind)

FW:
Name: Hells Angel
Weight: 12kg
Dimensions: 59 x 45 x 15 cm
Shape: Scoop front, rectangle body, wedged rear end
Weapons: a car radiator fan motor powered axe, drilled for lightness, but with still a heavy axe head, with a wallop power of about 500kg
Transmission: Ali protected Challenger drill motors attached directly to the compound rubber wheels, which are studded with screws pointing out (like those on Chaos 2)
Speed: 12 MPH
GC: 2mm all around, 0 at the scoop end
Srimech: The axe, the weight of which pulls it over so it cannot rest on its side. Make SURE you remember that.
Armour: 2.5mm mild steel on the sides, 2mm checker plate aluminium elsewhere
Strengths: The axe
Weakness: the armour may not stand up to strong FW spinners, but should prove good enough

RW:
Hell Boy
Weight: 6kg
Dimensions: 30 x 30 x 10cm
Power: 2 x 9v Ni-cad packs supplying 2 of the Zeobot drill motors and wheels with 18v
Weapons: a pair of temprature treated steel spikes on the top corners of the front wedge and a rear 10cm diameter circular saw run by another zeobot drill motor. The saw runs at 4000rpm.
Shape: Storm 2-like
GC: 1.5mm all over
Armour: 2mm steel all over
Strengths: Powerful drive and weapon
Weakness: thinnish armour

All my HWs are 100Kg, so Ill have to think up a new design

**mrdaves** · 4 July 2005, 14:21

The NSTT: Other-weights

I forgot to say, you can enter realies if you like.

But if the realie hasnt been seen on telly, please give a link.

**andrewj** · 4 July 2005, 19:29

The NSTT: Other-weights

Save me at least a place in each weight please.

**martyn** · 4 July 2005, 19:45

The NSTT: Other-weights

Raptor-weight- Catus-Baby-Catus
Featherweight- Storm Vortex http://www.teamstorm.comwww.teamstorm.com (its somewhere on there)
Lightweight- Typhoon Thunder (will probly be a new vapour but if i dont come up with anything else i will use TT)
Middleweight Typhoon
Classic Heavyweight- Mini Disco or something else depends

**swiss_tony** · 5 July 2005, 16:49

The NSTT: Other-weights

Save me a spot.
All I know now is that I want Conundrum [Stats at http://www.stupoo2000.pwp.blueyonder.co.uk/featherweights/database_conundrum.htmhttp://www.stupoo2000.pwp.blueyonder...undrum.htm]And I need some time to research some other realies, as I dont have any raptors/classics HWs as of now and If Im entering a tourny with one realie in a diffrent class, I feel I might as well enter that tourtament with all realies instead of having it diffrently balanced. [I bet you all NOBODY undersstood a word that just came out of my mouth

]

**swiss_tony** · 5 July 2005, 19:43

The NSTT: Other-weights

Three words: Thank You Coolrobots.
LW: Toe Crusher [I checked, its 50 lbs which is 25 kg]
MW: Knee Breaker [100lbs, which is 50kg]
Classic HW: Atomic [Series 4]
Raptor: Xenophobia http://www.teamcosmos.com/xenophobia/xenophobia.shtmlhttp://www.teamcosmos.com/xenophobia/xenophobia.shtml

**martyn** · 5 July 2005, 20:47

The NSTT: Other-weights

50lbs isnt 25kg cause 1kg = 2.2lbs

**mrdaves** · 5 July 2005, 21:00

The NSTT: Other-weights

Its underneath the weight limit, so it counts.

No FW then Tony?

**swiss_tony** · 5 July 2005, 21:05

The NSTT: Other-weights

Dave: Look at my post before the ones with my Classic HW, MW, LW, and Raptor for what FW im using.

**mrdaves** · 5 July 2005, 21:32

The NSTT: Other-weights

Chris L will be happy, your using his robot

**knightrous** · 6 July 2005, 02:05

The NSTT: Other-weights

Save me a position in the featherweights and hobbyweights please

**knightrous** · 6 July 2005, 03:00

The NSTT: Other-weights

Well here is my first of two terrors

Name: KE (Kinetic Energy)
Motivation: 2WD
Speed: 14MPH
Weight: 12kg
Height: 90mm
Length: 480mm
Width: 420mm
Weapon: The weapon is an undercutting 300mm diameter 1.6kg flywheel powered by two OS .30 Rotary 49-PI Wankel Nitro motors @ 3000rpm. Each motor has a peak performance of 1.27BHP at 17000rpm and the relative information can be found here: http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXBY72&P=MLhttp://www2.towerhobbies.com/cgi-bin...&I=LXBY72&P=ML
The motors have a centrifugal clutch and starter motor added on to prevent any mysterious stalls. The blade sits 0-15mm (Adjustable) from the floor and is designed to go under an opponent and take out the wheels/tracks/legs. The weapon can be raised slightly to the full 15mm where it can then target the opponents armor or skirting. The flywheel is made out of 4mm Hardox 400 for durability.
Drive: 2 x 12v Dewalts running on 14.8v current limited to 80amps each.
Batteries: 1 x 14.8v 6000N Polyquest LiPoly Pack. Ultra Light, Ultra powerful. Has a continous rating of 90amps and peaks of 180amps. Information here: http://robotcombat.com/marketplace_lipoly-pq.htmlhttp://robotcombat.com/marketplace_lipoly-pq.html
Armor: Combination of the following, 3.25mm Hardox rear wedge & wheel guards, 3mm Polycarbonate with 1mm Stainless steel bonded together for the rest. Uses a very light 15mm x 15mm x 2mm box section chassis.
Notes: A miniature version of Mad Dog (http://buildersdb.com/botpics/719.jpghttp://buildersdb.com/botpics/719.jpg) and is invertible. Extremely deadly! Approach with FEAR!!!

mDU will be posted up later once I research the necessary components and finish the idea off.

**dinowarrior** · 6 July 2005, 16:49

The NSTT: Other-weights

I MIGHT enter, but Im not promising anything.

The stats for my featherweight (Ram-Raider), lightweight (Little Big Bot) and middleweight (Tom) should be found in the PTT.

My Raptorweight depends whether you allow static weapons or not. If yes, then Ill enter Matamata. If you dont, Ill have to think.

All my heavyweights are 100 kilos or near to it as well, so Ill also have to think.

**mrdaves** · 7 July 2005, 10:19

The NSTT: Other-weights

Your allowed passive weapons.

Announcement

The NSTT: Other-weights

The NSTT: Other-weights

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment