CAD requests

[death robotics]

hey guys i was wondering if any one could possiby do a render of my bots

heres the list and the stats

Archmage
Weight: 13.6kg
Shape: The same shape as Pillow Torque, except for the lifter which partially sticks out the front.
Colour: Dark blue, with a blood red stripe down the middle.
Dimensions: 47cm x 30cm x10cm
Drive: 2 Astroflight C40 motors, using a 15:1 reduction, powered by a 19.2V 3700mAh NiMh Battlepack.
Locomotion: 4 Pillow Torque-style wheels.
Armour: 3mm titanium
Speed: 10mph
Ground Clearance: 0mm at front. 4mm elsewhere.
Turning Circle: 0m
Weapon: A 4-Bar electric lifter, powered by an Astroflight C90 motor. It can lift 75kg.
Srimech: Invertible, but the lifting arm can self-right it.
Strengths: Fast. Reliable lifter.
Weaknesses: Exposed wheels.
Bio: Lian Walsh's first featherweight design. Essentially Pillow Torque with a new paint job and a 4-bar lifter. Many thanks to Leo Van Miert and Jamie McHarg for helping to fix the stats.


The Servant
Weight: 100kg
Shape: Mute (S7)
Colour: Blood Red
Dimensions: 67cm x 96cm x 26cm
Drive: 4x 24v S28-400 Magmotors powered by 5x NiCad Battlepacks
Locomotion: 4 Mute-style wheels.
Armour: 5mm titanium
Speed: 35mph
Ground Clearance: 0mm at front, 5mm elsewhere.
Turning Circle: 0m
Weapon: A full-pressure rear-hinged Co2 flipper(looks a lot like Chaos 2's) powered by a fire extinguisher using a 70mm bore 100mm stroke ram. It can flip 500kg.
Srimech: Flipper
Strengths: Very fast.
Weaknesses: Untested in battle
Bio: Essentially an updated Mute, Team Blood Mages' Servant is prepared to do some damage

Dr. Thwack
Weight: 100kg
Shape: Biohazard.
Colour: Malachite green
Dimensions: 80cm x 75cm x 10cm
Drive: 4x 24v S28-400 Magmotors, powered by 3x 3000mAh NiCad Battlepacks
Locomotion: El Diablo Grande-style rubber tank tracks.
Armour: 4mm hardox
Speed: 20mph
Ground Clearance: 0mm all around thanks to 3mm titanium skirts. 5mm without skirts.
Turning Circle: 0m
Weapon: A 10kg pneumatic hammer, powered by a fire extinguisher using a 90mm bore 200mm stroke ram. It hits an opponent at 70mph.
Srimech: The hammer.
Strengths: Powerful weapon, nearly unflippable.
Weaknesses: Untested

that is all thank you, please reply to me if you have the time to do it thank you

[death robotics]

Re: CAD requests

i think im losing popularity lol

[kodster]

Re: CAD requests

Apologies, but do you really expect people to respond to you after 29 minutes, bearing in mind this part of the forum's been more inactive than it has for a while?

Please have some more patience.

[death robotics]

Re: CAD requests

ok sorry mate :P

[andrewj]

Re: CAD requests







Sorry, I couldn't resist...

[corsair_lightning]

Re: CAD requests

Sorry, I couldn't resist...

LOL!!! I can't believe you would actually do that.

[joey_picus]

Re: CAD requests

...I can XD

[knightrous]

Re: CAD requests

Who wouldn't :P

[death robotics]

Re: CAD requests

thats a bit random

[daliad100]

Re: CAD requests

Due to me needing a lot of practice and having thought about it for a while, I am now doing CAD's to the level of outer shell or rough internals (unless someone can point me in the direction of some robot parts models).

Finally a basic sketch would be nice for more complicated designs.

[death robotics]

Re: CAD requests

I dont need one for Dr Thwack or The Servant anymore
(AJ has done them for me )