Design Your Own House Robot

[davids]

Once The Killer Toad Tournament has finished, I am planning to do something rather special, of which more details will be announced once I have written them down.

But for the time being, could I ask 9 of you lovely fighters to design some house robots. But be reasonable, so Im setting the weight limit at 500kg. As for weaponry, could it be possible to stick to weaponry which is allowed, so no explosives, no acid, no electric-magnetic pulses etc.

[Guest]

Design Your Own House Robot

This looks... interesting...
How about this?

APOCALYPINATOR

Weight:500kg
Shape:Large Wedge with a sloped rear
Dimensions:130 x 150 x 60
Locomotion:4 x steel tank tracks (2 on each side)
Power:8 x LEM-130s running at 36v
Armour:12mm thick hardox on top, sides and rear, 6mm hardox on base
Weaponry:50 x 50 x 70 hardox vertical flywheel driven by 4 x LEM-130s, 750 psi Co2 powered front hinged flipper on a single 100m ram on the rear wedge, can flip other robots and acts as a srimech. The sides are lined with steel spikes, 6 on each side so it cant get stuck there.
Turning Circle:0
Ground Clearance:Effectively zero on front and rear due to wedges, 10mm on the sides
Colour:Massive monster face painted on the top and each side of the flywheel.
Top Speed:15mph
Notes:WATCH OUT!!

[corsair_lightning]

Design Your Own House Robot

Magnavox

Weight:500kg
Shape: Killalot with a solid back, and skirts on his front, back, and sides.
Dimensions: 180cm x 110cm x 85cm
Locomotion: 2 180cm x 10cm x 5cm titanium tank tracks
Power: 6-Magmotor Gearbox powered by 4 R34 car batteries.
Armour: 1.5cm titanium all over.
Weaponry: 2 arms, like Killalot. the right arm has a Mr. Psycho-esque claw on it, capable of crushing 6mm titanium at 6 tons of pressure. The left arm has a 30kg 50cm x 2cm x 50cm titanium flywheel with 4 hardox teeth. It can tear up 7mm titanium with no problem.
Turning Circle: 0mm
Ground clearance: 0mm because of the skirts. Without them, it is 5mm.
Colour: Gold.
Top Speed: 16mph
Notes: This master of mayhem wants to destroy your robot!

[alex_holt]

Design Your Own House Robot

Golden Lotus

Weight:500kg
Shape: Similar to the early tengus (ie a tapered and rounded cone)
Locomotion:4 go-kart wheels
Power: 4x Lem 130s at 46volts
Speed: 16mph
Armour: 18mm hardox scalemail, the scales are roughly petal shaped (like a more rounded rhombus) pointing upwards, at the base they are larger and get progressively smaller near the top, they curve round the ouside of the body. Each is attached by having a 10mm hole bored through them at their base through which a 9.9mm titanium curved rod is fitted so that all the scales on one level are moutned on the rod-loop. The rod for each layer is attached to the chassis which is made of titanium. All of the outside of the petals in gold plated, and the inside silver plated. Because Im decadant.
Weaponry: The robot is a true full body spinner (ie it spins on its own wheels) the petals have a second titanium mechanism inside, similar to Tengus old umbrella scrimech which opens the petals up and turns them all into blades - there are 6 blades at the base level and two more petals for every layer up, there are 5 layers in total. The umbrella mechanism is powered by a hyrdraulics.
Turning Circle:0
Ground Clearance:2cm
Srimech: The action of the petals opening selfrights it. If open when it is flipped, it may have to close the petals then open them again.


I dont have the slightest clue how much that would really weight, but nevermind...

[joey_picus]

Design Your Own House Robot

I agree with Liam, it sounds rather interesting.

Heres my attempt, weight is probably off and Ive probably gone technically overkill in all the wrong areas, but there you go.

Night Stalker (better names on a postcard, please)

WEIGHT: 325kgs
DIMENSIONS: 180 x 110 x 40 cm
SHAPE: Like a cross between a Formula 1 car, a non-muscle sports car, and T II from series 3...sort of box shaped but lower, more rounded with cutaways for the wheels, lots of bare chassis in some areas and lots of spoilers. Would draw a picture if I was more artistically talented.
COLOUR: Blackened red, which gets darker towards the rear.
DRIVE: 2 LEM200 motors, geared for acceleration and torque rather than speed (still quite a bit of speed though) running from 6 SLA batteries driving two large rear racing car style machined aluminium wheels, with black urethane rubber grip. The front two wheels are steered using a car type steering system based on compressed air pneumatics.
SPEED: 20mph
TURNING CIRCLE: 4m to do a complete turn. In practice, can probably do a three-point turn inside two and a half to three metres fairly quickly.
GROUND CLEARANCE: 0 at the front due to the weapon. At the sides/rear, it varies between 10 and 15mm depending on exactly where.
ARMOUR: Basic frame and some of the supporting bodywork is 10mm titanium plate, tube, and box section, while the rest (basically the sides and bits of the top) is 4mm Hardox, double skinned in key areas. Baseplate is 8mm aircraft grade aluminium alloy with the decorative sections of the bodywork made of 5mm titanium and 1.5mm carbon fibre.
WEAPONS: The main weapon is the front electrically operated 90cm long axe, driven from a flywheel and a Rolls Royce engine starter motor, made of steel with a carbon fibre reinforced bendproof shaft. The head of the axe is made of Hardox with tungsten edges and is diamond tipped, and is shaped like half of Excaliburs axe from series 3, only slightly more 3D so it leaves nice almond-shaped holes in opponents. It weighs 22 kilograms and can penetrate most armour fairly easily, and can dent fairly thick titanium and thin to medium Hardox at full power.
The front spoiler on the robot is a lifting scoop weapon, and lifts pneumatically from an 80mm low pressure ram and a 2.5kg tank of CO2 allowing it to be used about 20ish times in a match.
SRIMECH: Behind the slot for the axe, there is a Hypnodisc style righting bar which is hidden in the chassis and runs from the same pneumatics system as the lifting scoop, that self rights Night Stalker to the right in about one and a half seconds.
NOTES: Has shockproofing to counter hits from most kinds of weaponry, and also boasts rather bright red front headlights and a smaller pair of ultra-bright green LEDs just in front of the rear spoiler, as eyes.
STRENGTHS: Good weaponry, fast and controllable, fairly well armoured with good pushing power
WEAKNESSES: Uses car steering, wheels exposed from top

(Message edited by joeychevron on March 30, 200

[Guest]

Design Your Own House Robot

There was a robot called Night Stalker on Extreme Warriors 2.Dont know if it matters.

[joey_picus]

Design Your Own House Robot

Ah, didnt realise that _

[davids]

Design Your Own House Robot

Good Good

4 down, 5 to go.

[dinowarrior]

Design Your Own House Robot

Well, may as well enter my one...

NAME: Die-Ro
WEIGHT: 200 kilos
BODY SHAPE: Basically, its a box wedge, but mostly wedge. The top looks a bit like the head of Spyro the Dragon.
SPEED: 8mph
TC: 0
GC: 0 mm at front due to wedge, 8mm otherwise.
WHEELS: 2 inner
ARMOUR: 7mm Steel
POWER: Whatever it is that drives Growler. Sorry to be vague.
COLOUR: Purple.
WEAPONS: The head is mounted on a hinge, so it can open up its mouth. The snout, for this tournament, is elongated so that it drives along the bottom of the wedge. This allows it to flip oppodents. Spyros Horns can pierce down on oppodents at it side, and at the back is a mace that swings back and forth on a horizontal axis.
SRIMECH: Spyro uses his horns to self-right from his side, the shape of his body makes a back stranding near impossible.
NOTES: Die-Ro would have originally had a flame-thrower, which was why he was first and foremost ONLY a House Robot. I removed it here just to make sure I wasnt going against any rules.

[corsair_lightning]

Design Your Own House Robot

Are these house robots going to be in some new tournament you will make?

Just want to know.

[davids]

Design Your Own House Robot

They may be, well scrap the may and replace it with will.

Fight against the house robots is going to be making a comeback.

5 fights, 10 house robots and 10 normal robots, 2 normal robots taking on 2 house robots.

[corsair_lightning]

Design Your Own House Robot

If you make another regular tournament, such as the Killer Toad Tournament, could these house bots be in it?

[davids]

Design Your Own House Robot

Nope, I dont like making regular tournaments with house robots in.

Besides this will just a side-event between toads, to test out the new arena Im currently designing.

[kodster]

Design Your Own House Robot

Ill update Exa-Gore-Ic, mkay? The fellow needs a good seeing-to.

[kodster]

Design Your Own House Robot

Exa-Gore-Ic: Evo

Shape: A gigantic (but rather low) rectangular box with a spiked rear.
Weight: 400kg
Body Colour: Navy blue
Speed: 10mph
Armour: 15mm Grade 5 Titanium layered on top of 8mm Hardox 750
Drive: 2 LEM200s @ 48v
Power: 4 NiCad Battlepacks @ 48v
Motivation: 4 invertible CNC hubs with go-kart tires.
Ground Clearance: 0mm at the claws, 7mm everywhere else.
Turning Circle: None
Dimensions in CM: 150 x 150 x 40
Weapons: A pair of pincers. Think Tough As Nails. Powered by hydraulics instead, these can give a crushing force of 8 tonnes at the tip and 16 tonnes at the ram. Between the pincers in the front is a pneumatic spike to spear opponents while theyre being crushed to maximize damage.
Srimech: Invertible.
Strengths: Its a house robot...
Weakness: No CAD yet. :P

(Message edited by kodster on March 30, 200