Burket control

[mattsdragons]

What do people use to control their Burket valves?

Need to figure out something different for bulldog as it's not dumping the gas yet I figures it can just be scaled up

[Mouldy]

Re: Burket control

http://www.hobbyking.com/hobbyking/stor ... itch_.html

Cheap, light, failsafes and hasn't let me down yet.

[widow_twanky]

Re: Burket control

[quote=mr_turbulence]http://www.hobbyking.com/hobbyking/s... <br /> Cheap,

[team_mute]

Re: Burket control

We've been using Battleswitches in Mute, only done a few events but they seem fine

http://www.dimensionengineering.com/...s/battleswitch

Got them direct from states because we needed a couple but think you can get them from the UK, was a really good service from the states

[Mouldy]

Re: Burket control

Andy, my turnigy switch doesnt latch on as you describe, single action on or off.

Had nothing but problems with dimention engineering products... bec's esc's and i know many had troubles with there switches being intermitent and un-reliable.

[Revsmin]

Re: Burket control

We've been using Battleswitches in Mute, only done a few events but they seem fine

Use them in Skyfall, never failed me. Been in use since Barnsley this year, still going strong as ever.

[team_mute]

Re: Burket control

Only problems we found were when firing the flippers, sorted with a diode on the solenoid valve and haven't had any problems since, but like i said only fired it over the few battles we've had.

We used to use the team delta boards http://www.teamdelta.com/products/prod2.htm (think they were these, Daniel does all the elctronic stuff) worked a treat though

[Kenny]

Re: Burket control

used battleswitch, would never use again.

[blazerbotics]

Re: Burket control

don't like Battleswitch's far too sensitive and regularly mis-fire when you get a hard knock. The electronize ones were great but you cant get them at the moment. Team Delta ones from the states have always been good. A few people are using the Technobots ones without issue.

[terry]

Re: Burket control

i use bot switches seem fine dont know if they caused some misfiring on arming up for the previous event , it didn't happen at deeside. dont get me started on burkerts though
I had 3 spare kits for the champs just incase but didn't need any, maybe they are building them better.
matt are you going from lp to hp with 2 2kg buffers straight away big increase you want some power then !

[mattsdragons]

Re: Burket control

I'm going from FP no buffers to FP with buffers, power is what I'm after but a better way of controlling the valves aswell, the current system works but takes far to long to exaust so want something thats just on/of as it was before