PMEUMATICS

[Thunder arrow]

Re: PMEUMATICS

hi again just wondering could u use a bbq reg with the right conection size and inlet 70?



Theo

[jonny]

Re: PMEUMATICS

i doubt it, my bbq regulator has no where near that kind of input/output.

[Thunder arrow]

Re: PMEUMATICS

GREAT!!!!!

i h8 it when it takes 99999999801 years to find a reg ={]

[jonny]

Re: PMEUMATICS

dmac has got a trevor regulator he could sell you for £40 delivered. 10 bar outlet.

[Thunder arrow]

Re: PMEUMATICS

Hm

abit much but I think I can buy it

[Thunder arrow]

Re: PMEUMATICS

why does this have 2 coils and din(m) plugs?



http://cgi.ebay.co.uk/Pneumatic-5-2-Dou ... 1e5fd97429



theo

[woody]

Re: PMEUMATICS

It's a solenoid / solenoid as opposed to the prefered combat type solenoid / spring....
in this type the spring returns the valve to the OFF position... with the solenoid / solenoid you must energise the correct solenoid to turn it OFF.

USE A SOLENOID / SPRING

The above explanation isn't the total story ...but close enough for the beginner.

[Thunder arrow]

Re: PMEUMATICS

ok
i knew about the solenoid / spring but i just wondered what solonoid / solonoid was

[Thunder arrow]

Re: PMEUMATICS

Right more q

As u menchend before, is a 'dump valve' the real name for that type of valve?



Theo

P.s nealy done !!!¡!!!!

[woody]

Re: PMEUMATICS

A dump valve is our term for ANY valve / tap etc that is used to allow the compressed gas remaining in the system to be vented or dumped at the end of a fight.

The dump valve is a manual valve.... such as http://www.airlines-pneumatics.co.uk...ctCode=S070103 for your 10 bar system.

[Thunder arrow]

Re: PMEUMATICS

Thank but as the rules say (and you menchend it before ) u need one for the full bar bottle. Am I right, some types of tanks/bottles have ones that u turn so would that count?

[widow_twanky]

Re: PMEUMATICS

A dump valve is our term for ANY valve / tap etc that is used to allow the compressed gas remaining in the system to be vented or dumped at the end of a fight.

The dump valve is a manual valve.... such as http://www.airlines-pneumatics.co.uk...ctCode=S070103 for your 10 bar system.

Spot on if you vent the low pressure side, we tend to vent on the high pressure side so need a 1000psi valve which you can get from technobots (or anywhere wlse really)