PMEUMATICS

[jonophilpott]

Re: PMEUMATICS

Ok thats fine.

To me the QEV he has written up about here looks exactly like the ones you can buy off technobots?

[woody]

Re: PMEUMATICS

Are you refering to one of my pneumatics pages?

http://www.teamonslaught.fsnet.co.uk/pneu.htm

If so he would me and yes the QEV is similar if not the same.

[jonophilpott]

Re: PMEUMATICS

ahhh yes goodgood... if i was to get the burkert 5404 can i run full pressure?

[woody]

Re: PMEUMATICS

Short answer ..Yes.

[Thunder arrow]

Re: PMEUMATICS

so 1/8 is 6mm?

[JagCrusher]

Re: PNEUMATICS

dont wanna take the p!55 but could you guide me in the direction of a suitable ram please

Use Alans (Woodys) excellent spreadsheet to see what different size cylinders will do... http://www.teamonslaught.fsnet.co.uk/Max.xls ...and check the manufactures specs, esp. weight.

...can i run full pressure?

Read this thread... http://www.fightingrobots.co.uk/foru...p?f=165&t=2618 ...Metal Demons' post has some good advice.

[woody]

Re: PMEUMATICS

NO ..3mm is the equiv of 1/8 and 6mm is the equiv of 1/4
They are not an EXACT conversion but a close equivalent.

BUT ..If your refering to pneumatic / hydraulic port sizes it's more complicated... the port size refers to the inside dia of the pipe that the thread is ON and has no numerical relationship at all to the hole size.

I did give you a link to my threads page.

Here's a helpful bit of software for you for normal conversions.

http://joshmadison.com/software/convert-for-windows/

[Thunder arrow]

Re: PMEUMATICS

Thx alot woody
I'm going with 1/4= about 6mm
of about 25 bore and 80 stroke
and I still need to get a reg ( pref from a shop)
and a 5/2 valve from technobots or eBay or airway pneumatics
but on the pneumatic place do u just plug th coil into the black thing poking out


Theo

P.S stop nicking my topic

[woody]

Re: PMEUMATICS

Download and print out this pdf.
It has a measuring guide for pipe/ gas threads
http://www.baumhydraulics.com/files/inf ... g_info.pdf


Edit ..I'll post a pic later of a valve for you ....dismantled and assembled

[Thunder arrow]

Re: PMEUMATICS

Thank woody for going to get the valve pictures

Just the reg, cylinder, valve and bottle to buy
need to find a reg place :sad:


Theo

[jonophilpott]

Re: PMEUMATICS

Lets get things straight here ive not been about for a while but this hobby involves HELPING OTHERS
People travel from far far away to partake and it has a very friendly atmosphere.

Im pretty sure youd be annoyed if you went to an event and needed something and no-one would give you it and you only had one battle and you couldnt do anything for the rest of the weekend.

So stop being silly because i asked a few questions...

P.S. Thanks for your help guys Much appreciated!!

[Thunder arrow]

Re: PMEUMATICS

I was just a joke :shock:
Didn't mean to hurt u but take a joke

A very Theo

[woody]

Re: PMEUMATICS

Here you go.[attachment=1:dtpqhhbc]P1010016a.jpg[/attachment:dtpqhhbc][attachment=0:dtpqhhbc]P1010017a.jpg[/attachment:dtpqhhbc]

[Thunder arrow]

Re: PMEUMATICS

That's easy thank you
but where did u buy them from?
And what is the other thing apart from the coil and valve
and if u buy a valve from airwayspneumatic do u get the other thing
aswell or not


Theo

[woody]

Re: PMEUMATICS

The plug that goes on the coil ?

Ebay is where I normally buy valves.

If your buying NEW then everything is a seperate item.

Buy on Ebay or the Forum then you might well get the complete ensemble for one price.