Tweet
hi
robot is going well
just the weapon
what is a lowish flipper psi rating ????????????
Theo
robot is going well
just the weapon what is a lowish flipper psi rating ????????????
Theo
-
-
Re: PMEUMATICS
It normally goes on Bar... I would say 8-10 Bar is ok -
Re: PNEUMATICS
Some light reading for you ;o)...
http://howto.killerhurtz.co.uk/pneumatics.htm
http://www.technobots.co.uk/Technica...g%20Robots.htm
http://www.teamdavinci.com/understanding_pneumatics.htm
http://www.fightingrobots.co.uk/foru...hp?f=111&t=542
http://www.robowars.org/forum/viewto...er=asc&start=0Comment
-
Re: PMEUMATICS
Hi
thx for the info
my weapon is going to be 10 bars
how much would a co2 tank from the
peeps from nottingham??Comment
-
Re: PMEUMATICS
be best if you got a 600g co2 bottle, johno sells them for about 40ish i think can't quite rememberComment
-
Re: PMEUMATICS
I no but he told me to get them from
the Nottingham people
and yes I am using a 600g (20 oz) bottle
theoComment
-
Re: PMEUMATICS
how do u control a 5/2 valve with a rc controller???
like...
http://www.technobotsonline.com/aircomp ... 32670.html
(how many bars can that hold)
theoComment
-
Re: PMEUMATICS
8 bar ..you'll need a r/c switch
http://www.technobots.co.uk/acatalog/Sh ... s_157.html
any of the first 3 will do.Comment
-
Re: PMEUMATICS
Thx that's proberly all
theoComment
-
Re: PMEUMATICS
I am going to buy this 1
http://www.technobots.co.uk/acatalog/Sh ... A_670.html
But how do u attach the valve to the mirco controller
TheoComment
-
Re: PMEUMATICS
Be aware Theo that that is infact the old website
Try www.technobotsonline.com ... He may not do some of the robot based stuff anymoreComment
-
Re: PMEUMATICS
http://www.technobots.co.uk/acatalog/Sh ... A_670.html
Simply replace the motor in the drawing with your valve solenoid.
That's assuming you can buy this switch from the new site.Comment
-
Re: PMEUMATICS
what drawing
.......
o i found it
and yes they do still sell themComment
-
Re: PMEUMATICS
do u have a pic of a inside of a robot with 1 like that with a speed controller
(because i dont understand how u put the battery wire to the speed controller and battle swich)
TheoComment
-
Re: PMEUMATICS
made a mircosoft thingyComment
Comment