4WD

[team_orr]

Re: 4WD

hi
actualy i will be at reading on the sunday now :P so yeah il see you there

[Helloher]

Re: 4WD

Hello again. Thanks everybody for the responses.
I have three questions.
1) Can anybody reccomend a specific speedo for 4wd's?
2) Can anybody explain about the saftey links in more detail?

I am happy to wait until Reading for those to be answered.

Also, a more general thing,
3) If I was to go and only do a 2WD robot, would I need to fit an axel at the front or just mount the wheels on?

[teamshock]

Re: 4WD

Hi,

Try and find me at reading and I'll show you the insides of Whirlpool (our 4WD pusher).

[cliveb]

Re: 4WD

We will be there as well, so get Will to bring you over and have a gander inside Stagefright, to see how not to do it.

[team_orr]

Re: 4WD

hey guess what?
im gonna be there both days now :P so come take a look at any of my robots whenever, just ask me and il talk anyone through it, oh and that goes to everyone not just Helloher

[RogueTwoRobots]

Re: 4WD

I've seen one made out of a 13 amp mains plug.

That was fun
Used to get some odd looks for having a run-of-the-mill household plug sticking out the back of my robot. It did the job but isn't the most reliable method as a large ramming impact can knock it out slightly and disrupt the power flow.
However at the time I was extremely skint (not much has changed right now ) so it was a low-cost solution as I scavenged the parts from the tubs of electrical bits and bobs we had in our cupboard

[Helloher]

Re: 4WD

What about the Type FR30HX Elextronize Controllers? Would they be suitable?

Also, somebody said you can buy Safety links from Technobots, but I've looked and can't find any.

[psycho_fling]

Re: 4WD

yeh those controllers would be fine again you would need 2

make your own link with the samller deans connectors (most people do this)

http://www.technobots.co.uk/acatalog/Si ... ctors.html

or like me you could use these called denas connectors less hassle and can be more reliable IMO

http://cgi.ebay.co.uk/10-Pairs-Deans-St ... 518d692362

alex

[Guest]

Re: 4WD

i know this has nothing to do with this topic but will anyone here be a wigan in december?

[team_orr]

Re: 4WD

well, i have been known too use tin foil...but dont just dont :P

i personaly use the anderson connecters, just a personal prefrence but deans work just as well, i just think that if your robot is spazing around in the arena with a 4kg disk, if i were the arena marchal i would want the biggest link possible :P

if you want even more low-tech option go down to your local maplin and buy a couple of tamiya connectors, simple and cheap, and the good news is that its maplin! so you can get some LEDS (mine where £1.50 per ba, i got 2 packs of 20 ) and some solder etc etc, also, i was quite supprised to find the mfa motors there, they were £20 and i think they would work well.

you could also get some dpdt switches (double pole double throw) and some servos and make a low cost esc as seen in rexs robot challenge. but that is a bit off topic :P but what im doing atm

@everyone: could i use the dpdt switch style esc in a 4wd system?

jack

[cliveb]

Re: 4WD

yes

[team_orr]

Re: 4WD

awsome , il do some testing

[muchalucha]

Re: 4WD

as the 4 wd thing goes , ill be at reading on sunday and ive recetnly finishes a 4 wd drive bot using 2 drill motors and ten quids worth of chain and sprockets from t bots