bonecrusher- the first bw from Suvv Industries Robotics devision

[suvv]

its 2 40amp botbitz controlers and in my haste to glue the grub screws i may have loctite the entire hub to the motor shaft....it may need combat to shift them off the motors again and i have discovered that the grub screws have fell apart inside so they werent tightening properly once the whole glue thing has decintergrated im goong to drill them out and re tap the threada d try your suggestion

[Flag Captured]

fight 3 fqhwaghds:

this was more of a dignity saver attempt for me having won nothing so far and surely i couldn't lose to a bunch of cable ties and optimism...oh how wrong was i things started off well i was able to push him about and generally do something i opened the pit thinking i could navigate him round and in my haste to get back into the fight i forgot what my bot does if you give it full throttle...and turned myself directly into the pit

Secondary weapon: intimidation and mind control. YOU CAN'T BEAT THE FHQWHGADS.

In all seriousness though, I'd consider that a win by all accounts, you walked all over Fhqwhgads. Was extremely unfortunate you ran into the pit! And, you managed to bust one of my gearboxes further, I'd need to watch the video back of it (anyone have that btw?) but I was immobile on one side I think. Ironically if you'd have left me alone, you'd have taken that!

Great machine though, if you can get the little issues sorted out I can definitely see that being a tough little machine! How much weight did you have left over for improvements?

[suvv]

i think i have about 15 grams spare and in traditional robot form now that the competition is over i have got it working much better im going to try to put a bit of a better edge on the wedge and see how it goes and annoyingly my camera decided to not record that one as id like to see the replay on it myself

[RogueTwoRobots]

YOU CAN'T BEAT THE FHQWHGADS.

Unless Fhqwhgads gets hoisted by a certain servo lifter robot, dragged around the arena and dumped in the pit

I think I got all the fights on video so should have Bonecrusher v Fhqwhgads (I'm finally getting the spelling right without having to look at it!) but haven't sorted through my stuff yet. Will get it uploaded if I do.

[Flag Captured]

Which simultaneously broke my gearbox, yes I know

And that'd be awesome if you could do, the crowd reaction was utterly hilarious haha. If you have the aftershow things-running-into-spinners match as well, get that uploaded because that was rather brilliant too!

[suvv]

i beleve the crowd reaction was cheerio cheerio cheerio a tradition scottish farewell for when you have truly faceplanted the pavement of life

[suvv]

and i have the spinners match will get it up at somepoint

[mrsam]

The one part of the Event that Lynx actually did something useful, was great meeting you and the robot looked really good for a first effort. Just remember, you didn't do as badly as me

[suvv]

thanks was great putting names to faces at this though i did work out why my robot seized up at the end i might have been too optimistic witht the loctite and glued the motor solid

[suvv]

bonecrusher mk3

well i thought i would drop in a little update seing as my last post was just after the scotland event
that event was a great learning experiance for me in tearms of driving and wheel atachment and how not to use loctight for the mk 3 i decicded to stick with 2wd after much procrastinating and waiting of parts from hong kong i decided sod it and looked at the flaws with the mk 2.

i sat and watched my fights and decided that i needed to

improve the drive train

slightky thinner wedge as 4mm was overkill

stop it being able to sit on its back end

after discovering things online and watchig more of other people robots i did some cutting and grinding and swareing and i think you will filnd the bot mostly an upgrade it now has much grippyer wheels that are attached witn double grub screws so it should be solid the base and top panels are going to be recut to fit better and will be made out of 2mm hdpe the side is 15 mm hdpe and the front is a 3 mm steel wedge that hase been grinded down to give better contact with the floor hopefully it will survive the big hits and with its new drive train it will be able to shove most things out of the way also did i mention its goong to be running on 14.8 volts so to quote the book of clarkson poowweeeerrrrrr

[suvv]

the big start of the year update

well folks its the long overdue update with what happened at the champs and plans for new creations and the next iteration of bone-crusher.

the uk beetleweight champs 2015

i rocked up to the champs with with a large degree of optimism and after getting everything plugged in and putting it in the arena for a test i discovered a major issue, the wonderful wheels i had basicly designed the whole bot around for max pushing power had absolutely zero traction on the arena surface i had to have them going at full speed just to get a hint of movement que panic and the bodging of some snap wheels to a a spare set of hubs i had with some hot glue suffice to say they were wonky as a clown car but no time left before the first fight meant i had to dive in to it.

bonecrusher mk 3 v bananageddon v rpm v incomplete control

well with wonky wheels i ploughed in with little ability to push against a very good spinner and Rory's one night superbuild and the beetle cluster that did much better than everyone expected i tried pushing incomplete control for a bit then got lucky and managed to shove one of the cluster into the pit with the other half decided suicided into the pit not much else happened as time was called and somehow i went through on a judges decision

bonecrusher mk 3 v limpet v incomplete control

this match had very little highlights in between fights i had tried to mcguyver some wheels useing gorilla tape and hot glue and it turned out to be utterly pointless as after much pushing and shoving limpet decided to end my champs run and dumped me in the pit

the future
boncrusher mk 4
first plans for this are better drive and traction thankfully someone was very generous and gave me some banebot wheels 4 to be precise so its going to be a 4wd upgrade with lots of grip and hopefully will lead to something more effective

scorpinok
one of 2 new bots comming this year very much an attempt at getting a spinner further in the uk champs than this year again updates comming soon

sweet dreams
this is more of a show bot than anything else basicly a beetle version of nightmare more info to follow once i have more to tell

suvv