Featherweight och Heavyweght

[flippt]

Tnkte att alla fetaher/Heavyweight skulle skriva in hr. Sjlv har jag F…TT tv st motorer av en person. Han tyckte att dom bara skrpa, och sg mej i tidningen, ringde och frgade om jag ville ha grejorna. Vad tror ni jag sa d?
Sjlvklart! Okej, gick inte riktigt p det sttet men man kan vl f drmma.

Men nu kommer frgan. Jag har tnkt att chassit ska vara av aluminium stavar (ocks ftt), men kommer det att hlla? Plus att vilken sorts fartreglage ska man anvnd om man ska ha tv st 12V, ca 5 Ah?

[bugs]

Featherweight och Heavyweght

In english please?

[Guest]

Featherweight och Heavyweght

Stefan, this is the Swedish part of the forum, so dont expect people to speak english here, but Ill make an exception this time.

Joacim said that he had been donated two scrap motors, and he wondered what type of speed controller that would be suitable.

[bugs]

Featherweight och Heavyweght

Im sorry, I suppose you dont have a forum in your own language. The thing is, if you want to get any aid from other people chances are youll get more response if you post everything in english. Apart the odd ball who enjoys translating your postings of course.
None of the other europeans post in theyre own language for the same reason. Plus I think its a curtesy towards our english hosts

Now to answer your question: It depends on the motors
If youre on a tight budget, try to get a hold of a weelchair motor controler. If youre willing to spend some money go for Mythras (Kees Sicking) or roboteque.
For fetherweights those australian osmcs look promising http://robowars.org/http://robowars.org/ or you can go for electronize.

[Guest]

Featherweight och Heavyweght

Perhaps youre right, especially since the Robot Wars forum is about to close.

But he also asked all the Swedish roboteers to post something about there robot, which would have been difficult to do in the other sections of the forum. Another thing worth mentioning is that he probably wanted a Swedish manufacturer, since that would decrease the cost.

Anyhow, the motors which he had found will only draw about 5A or similar, so a RoboteQ might be a little waste of money!

Joacim, om det bara rr sig om 12V s fungerar vanliga reler frn till exempel http://www.biltema.se/>

[jamesb]

Featherweight och Heavyweght

I reccommend electronize (up to 30a continuous)
or Mtronics (various currents)

prices are around £40 each for electronize (see http://www.technobots.co.ukwww.technobots.co.uk)
and from £25 each for mtronics (e-mail me, see profile)

if you want slightly bigger motors, e-mail me
James

[Guest]

Featherweight och Heavyweght

Since there are a few people who enjoy translating our posts (*cough* Maddox *cough*), perhaps this could be of any help?

http://www.geocities.com/Athens/Acropolis/1290/http://www.geocities.com/Athens/Acropolis/1290/

[flippt]

Featherweight och Heavyweght

actully, I have A- in English, so its not to bad. The Ah, have no clue, but the motors are running on 24V! The donator had more motors, but I did´t have chans to see them. I´ll mabey chance to drillmotors

Christan: Hur fasiken fungerar dom?

[Guest]

Featherweight och Heavyweght

Joacim, a relay works in the same way as normal switch, just that its controlled by an electric current. So you feed it with a small current, then the relay can switch relatively large currents.

[flippt]

Featherweight och Heavyweght

Kan somebody in the near Stockholm help me with the eletronik? It´s a bit too comlicated for me......Or come to Askersund and help me.......you choose.....

[Guest]

Featherweight och Heavyweght

Uhm, Johan or Marcus?

[flippt]

Featherweight och Heavyweght

Somebody!

[Guest]

Featherweight och Heavyweght

Well, they are the only ones who live near enough.

[gizz]

Featherweight och Heavyweght

S vad, ska alla vi skriva i engelska s e det ju inte s lnt att ha ett svenskt forum eller har jag missat ngot?

[Guest]

Featherweight och Heavyweght

Du kan skriva p svenska om du vill, men sjlv fredrar jag engelska.