Very large steel tube

[Max]

Hi,
I'm still in the planning stages of a fw fbs but started thinking about the spinner part itself, for this I need a bit of steel tube with either 10mm walls 8 inch diameter or 3mm walls 16inch diamter , 75mm long.

But I don't know where I can find steel pipe of this size, online it seems to stop at about 6" and only goes up to 3mm wall.

Anyone have any ideas where I can get this size tube?

[typhoon_driver]

Go have a word with oil field casing supply companies. There are standard sizes of casing that would likely fit the bill of what you are after

[maddox10]

How long? The 8" sounds plausible for me to get.

[Max]

How long? The 8" sounds plausible for me to get.

About 75mm long, 10mm walls. Like I said just in planning stages but need to know if it is possible to get hold of and roughly how much it will cost.
Thanks

[maddox10]

The wall thickness won't be 10. That ain't a standard pipe.
For that you'll have to look in machining pipe (prebored steel or ali billets)

[Max]

Doesn't have to be exactly 10mm- could be 0.4" which I think is standard (schedule 60?), dimensions are still very flexible as still in planning stages.

[plargen]

try these guys they might be able to roll you something of the right size

http://www.ebay.co.uk/itm/2211942746...84.m1423.l2649