Titanium/hardox or equivalent

[plargen]

Hi im hopeinh someone has a piece of hardox or titanium no smaller than 200X45mm and between 3 or 6mm thick for a new blade for scruffy 2 as the 1mm blade i had bent far to easily and i cant find anything on ebay

cheers

[Eventorizon]

http://www.ebay.co.uk/itm/Titanium-p...item4178d4e5c8

Would that do it?

[plargen]

could do ..... was hoping for something in this country

[Liftoff]

That seller is fine, I bought a piece 400x300mm earlier this year, price is ok and so is the grade of titanium she sells. Or you could go for a planer blade, the material is surely harder than Ti or hardox and you can find that at varous dimensions and locally. I had one on Liftoff, 3 by 30 by 300mm...made a really nice front blade for the flipper!

[plargen]

found a planer blade on ebay quite cheap will get a bit and have a look sounds promising, unfortunately its only 30mm instead of 45mm so might have to bot the bot a bit

[Liftoff]

If you go for a planer blade try to get it pre drilled as it will be a pain to do it with normal tooling...

[typhoon_driver]

I'll have a look to see if i have any small bits of hardox sitting in the basement that I don't need.

[plargen]

brilliant that would be be great if you could find a piece, might make a few blades out of different materials and see which holds up the best at the next champs

[typhoon_driver]

It will be the hardox

[maddox10]

Available. Ti 3mm thick, Hardox 3.2 and 6mm.
Even Hardox 650 in 8mm. But that's not workable with any normal cutting tool.

[plargen]

do you know which would make a better blade and how much you you would want for a piece

thanks

[Eventorizon]

Even Hardox 650 in 8mm. But that's not workable with any normal cutting tool.

How much of that do you have? I am looking for something like that for Conker 3's weapon.

[maddox10]

230*70*8
How would you work it?

[Eventorizon]

Water Jet Cutter, I would be able to squeeze 3 blades out of that I believe, Just. I was hoping it was a little bigger.

[typhoon_driver]

Woah this is a little unfair taking over someones thread for something they may be interested in. Go make your own Alex.