electronize 15a esc

[lewisantweight]

I really need 3 of them i have one on its way but i dont want to pay 60 quid for another 2 so does anyone have a spare one?

[roketrhino900]

Re: electronize 15a esc

FOR THE BILLIONTH TIME YOU DON'T NEED A SPEED CONTROLLER FOR A WEAPON!
A battle switch is what you want for your actuator.
Good luck on finding the next speedo.

[harry hills]

Re: electronize 15a esc

well, you need some sort of dual battle switchy thing which are 20ish quid so that i can go up and down, i just preffer using an esc.

[jonny]

Re: electronize 15a esc

neither single or dual battleswitch will work, you can use a technobots or rc switcher but as you're building a crusher it may not be able to take the current. use an electronize 30 for the actuator.

[typhoon_driver]

Re: electronize 15a esc

I do get a laugh at some of the crap posted on here sometimes.

Roketrhino - a speedo is a perfectly acceptable and in some ways superior way to run an electronically actuated crusher. Depends entirely on what you want it to do

Harry - Do you know the spec of the linear actuator in use? If not then how can you say with any reasonable assertion that a 15A electronize will not handle it? The majority of store bought linear actuators I've seen will not draw more than a few amps even at stall. If it's a custom solution then the sums have to be done to be able to determine if a speedo will be able to handle it. A battleswitch doesn't handle more than 10A if I remember correctly anyway.

Lewis I'm afraid I don't have a spare 15A electronize, good luck in looking for a couple

[psycho_fling]

Re: electronize 15a esc

i use a victor 883 ( a single channel speed controller) on my custom lianc best solution i have found so far

[typhoon_driver]

Re: electronize 15a esc

I've got a blown victor (took a shock inside hornet allowing the fets to touch and short) that i've been meaning to get around to repair for a number of years now Fantastic controllers!

[lewisantweight]

Re: electronize 15a esc

i have got a 15a electronize on the way and was thinking of using a scorpion xl for the motors.

[maddox10]

Re: electronize 15a esc

Wait with ordering an XL untill next week.
May 6th we'll know if a Scorpion XL-GR01 combo fullfills the wishes.

if not, a XXL does the trick.

[lewisantweight]

Re: electronize 15a esc

i want to order it soon though because i have to order it from america

[maddox10]

Re: electronize 15a esc

If you want to take the risk buying 2 expensive speedo's...

Better safe than sorry, and for ease of use I can advice , Buy the XXL. it's $50 more , but then you have a speedo that can run with the big motors too (up to 14.4V Speed 900 low gearratio).

[Laser]

Re: electronize 15a esc

You can get scorpian xl's and xxl's from france at www.robotshop.com

[lewisantweight]

Re: electronize 15a esc

THANKS BUT IT IS RIDICULOUSLY EXPENSIVE at least in the american one it was 65 quid

[harry hills]

Re: electronize 15a esc

if that is ridiculosly expensive, you are in the wrong sport

[lewisantweight]

Re: electronize 15a esc

what i mean is it is expensive compared to other places where i could get them from