Some plastic

[Thunder arrow]

Hi
I'm looking for a piece(s) of plastic ether:
7x15x2 cmx2 or
14x15x2cm or ideed
15x15x2 cm

Phuee that's a bit of a list!

P.S they are for some motor mounts

[harry hills]

Re: Some plastic

Ebay will be your friend here

[Thunder arrow]

Re: Some plastic

What type of plastic? I'm thinking nylon

[Thunder arrow]

Re: Some plastic

http://www.ebay.co.uk/itm/Clear-Acrylic ... 343wt_1336

?

[typhoon_driver]

Re: Some plastic

go for nylon. Good for structural parts. That perspex is useless. Will crack and shatter after a shock.

[Thunder arrow]

Re: Some plastic

Can only find 15mm on ebay

[Thunder arrow]

Re: Some plastic

Scrap thos measurement I have had a better mounting plan still using plastic tho
I need 30x30x2cm
Or 28x30x2cm

[typhoon_driver]

Re: Some plastic

http://www.ebay.co.uk/itm/NYLON-sheet-n ... 53e770d238

http://www.ebay.co.uk/itm/NYLON-PLATE-C ... 1c102f7dd5

There's plenty of 20mm available

[Thunder arrow]

Re: Some plastic

I must be blind!

[PJ-27]

Re: Some plastic

HDPE is about half the price of Nylon, I don't know how they stack up against each other for structural use those.

[typhoon_driver]

Re: Some plastic

HPDE is softer and more likely to deform hence why it is good for armour. Nylon is better for structural parts as it deforms far less under load and is more dimensionally stable. A thread will also hold in nylon for longer than in HDPE.

[Anttazz]

Re: Some plastic

For structural parts, as a cheaper alternative to Nylon rather than use HDPE I have used RG1000. Both of which are used in Cicatrix so its quite good for comparison purposed and I havent noticed too much of a difference between the 2 of them in terms of damage/deformity.

[Thunder arrow]

Re: Some plastic

Thanks