need Hardox

[Thunder arrow]

someone have some hardox
(for a featherweight)

theo

[psycho_fling]

Re: need Hardox

you will need to specify size and thickness as there is a wide range of dimensions

[typhoon_driver]

Re: need Hardox

much you after? I got a fair bit of 5mm and possibly some 4mm kicking around. Also, you got the tools to machine it?

[Bodge Job]

Re: need Hardox

If there's some spare hardox afterwards please can I have some

[typhoon_driver]

Re: need Hardox

Well no one has asked me for any. How much do you need and do you have the tools to safely machine it?

[RogueTwoRobots]

Re: need Hardox

Well no one has asked me for any

Can I have some hardox please?
May well need some for making the outer armour of D2. Not much, maybe some offcuts, but will talk to you on Tuesday (and maybe bring a cardboard mock-up of what I'd need) to see if you think you'd have anything suitable.

[typhoon_driver]

Re: need Hardox

no worries mate, mock something up and i'll let you know. No promises on anything though as I know i have a relatively large piece of 5mm but only small bits of 4mm and I know thats what everyone always wants

[RogueTwoRobots]

Re: need Hardox

It's early days yet but I reckon I'll have enough weight spare to go for some 5mm stuff. I'll probably need the extra thickness with what is emerging from some people's workshops! But yeah, will bring the chassis and a mock-up along and we can work something out.

[Bodge Job]

Re: need Hardox

If you have a large of cut Bigger than 40cm by 15cm, The thicker the better, can I have it?

[typhoon_driver]

Re: need Hardox

PM sent

[Thunder arrow]

Re: need Hardox

hi sorry my internet is down (im at my grandma)

has all the metal all gone

if it hasn't, how much would 20 x 12 weight & how much £

if its gone where can u get some

[Thunder arrow]

Re: need Hardox

dont mind how thick but at least 4mm please

[typhoon_driver]

Re: need Hardox

I'm in glasgow for a few days and so I can't give you gents yes or nos to what i have and am able to supply (workshop is in edinburgh). Once I get back I'll take a look and let you know. My other problem is that my 230mm angle grinder burned out the other day so I'll need to get a hold of another one, but don't worry, I'll sort out these problems soon enough!

[Thunder arrow]

Re: need Hardox

lol hi my robot had a big floor in it
so my robot disign has changed but i still need some hardox

the new sheet i need is 4mm (thickness) or bigger (not that fussy) 25 x 12

thx theo

[Thunder arrow]

Re: need Hardox

and how much will it weight?
and how much money do u want?

theo