Bolts,push on retainers and velcro

[psycho_fling]

Hi all

Looking for 2xM9 bolts 20mm-30mm allen key head prefered

also some 13mm push on retainers x6

and finally a small piece of adhesive velcro 10cm long

i would buy all these things but i only need a small amount of each so thought id try here first

thanks alex

[woody]

Bolts,push on retainers and velcro

M9... Non Standard or a Bastardd size.

Velcro ...Cheapskate!

[psycho_fling]

Bolts,push on retainers and velcro

oh right woody yeh well might end up buying some

[robotwars]

Bolts,push on retainers and velcro

got to ask..... why M9 ????

[psycho_fling]

Bolts,push on retainers and velcro

because thats the only size that fits the thing for my motors and cant be changed

[maddox]

Bolts,push on retainers and velcro

????

What motors are those? Not the Speed 900 based one. The 2 sizes of bolts there are M5 and M8. M5 on the motor itself, M8 for the axle.
M9 isnt available commercialy. Its M8 or M10

You sure it aint an imperial based messure of bolt? Like a 3/8 UNC?

[woody]

Bolts,push on retainers and velcro

Mario is right make sure it isnt an American thread...standard drill chuck threads are 3/8 UNF and the UNified Fine thread is in general more widely used than UNC.


(Message edited by woody on September 07, 200

[typhoon_driver]

Bolts,push on retainers and velcro

If its not standard then drill and retap it. Thats what I did with my eteks.

[psycho_fling]

Bolts,push on retainers and velcro

sorry my mistake must be M8 thanks Mario