If this is your first visit, be sure to check out the FAQ. You may have to register
before you can post: click the register link above to proceed. Please email info@fightingrobots.co.uk if you have any questions.
Announcement
Collapse
No announcement yet.
2011 Robo Challenge UK Championships. April 15-17, NEC
Re: 2011 Robo Challenge UK Championships. April 15-17, NEC
last minute panic, decided to put Alpha back together today, went to check it and found one motor pulling 50amps on no-load! Having stripped it and cleaned it up, checked it again, now pulling 40amps and getting very hot, turns out it had a winding gone, but you could hardly see it. So panic as it takes 2-3weeks for a new motor to come from Germany. Luckily i have managed to find an old motor with a bent case, but good armature, but its a different hand, but will hopefully fit, will try it on Friday. This may explain Alphas poor power over the last few events (years!) because good knows how long i've been running it burnt out!
Re: 2011 Robo Challenge UK Championships. April 15-17, NEC
Roboteer emails will be going out to everyone today. It will contain a lot more info than usual due to the nature of the event so please take your time to read through all of the document. If anyone has any quires our contact details will be provided. Good luck everyone not long to go!
Re: 2011 Robo Challenge UK Championships. April 15-17, NEC
Depends which robot gets most beaten up by a spinner
Probably won't know until the event itself (one week - eeep!); are you planning on going for a new record?
Re: 2011 Robo Challenge UK Championships. April 15-17, NEC
i wont get a spinner that light I dont think but ill be under the old 12kg limit id have thought. Still waiting on lipos from flightpower, there taking ages, like 2 weeks so far and iv emailed 3 times and not had a reply so dont know what im doing about batteries.
Re: 2011 Robo Challenge UK Championships. April 15-17, NEC
I'm still waiting on wheels coming through. Ordered them a good 3 weeks ago. Worst case i'm gonna have to make my own from some HDPE I got kicking around.
Comment