24th, 25th & 26th May 2008 - Robo Challenge

[m2xt]

24th, 25th & 26th May 2008 - Robo Challenge

Grant, as a mater of interest who said you needed the Roboteers own equipment to be PAT tested? This may be a grey area but my own opinion for whats worth is that mains powered equipment you lend out to Roboteers would need a PAT certificate (including extension leads). As the Roboteers are using their own equipment and they are not members of the public or are they employees of yours, the PAT requirement may not apply to the Roboteers. However, if the venue insist I guess they do not need to justify their stance.

[woody]

24th, 25th & 26th May 2008 - Robo Challenge

Scope of the legislation

It is clear that the combination of the HSW Act 1974, the PUWER 1998 and the EAW Regulations 1989 apply to all electrical equipment used in, or associated with, places of work. The scope extends from distribution systems down to the smallest piece of electrical equipment.

It is clear that there is a requirement to inspect and test all types of electrical equipment in all work situations.

Your right Paul ...The Venue insists...insurance ...legal liability ...Blah...

(Message edited by woody on March 29, 200

[geeza]

24th, 25th & 26th May 2008 - Robo Challenge

Otherwise, just charge up a couple or hawkers to use you chargers from at the event. As for soldering - use a blow torch.

[m2xt]

24th, 25th & 26th May 2008 - Robo Challenge

Woody, I really hate the way this country is going with regards to H&S, but I wont get started on that because Ill get all wound up. I frequently enforce the PUWER 98 regulations & EAW Regs when I freelance as a consultant and as regulations go they are not bad at all, its just how some organisations interpret them that is the problem.

Grant, how about trying a different venue?

[grant_ploughbot]

24th, 25th & 26th May 2008 - Robo Challenge

We have had a few offers, and a few cheaper alternatives to buying PAT testing machines so things are starting to look better. The venue requires ANY mains powered things to be PAT tested, i beleive its part of their own insurance policy.

The Sign-up page is now working, sorry for the delay.

[cliveb]

24th, 25th & 26th May 2008 - Robo Challenge

Not for me it isnt

[psycho_fling]

24th, 25th & 26th May 2008 - Robo Challenge

i have signed one robot up psycho fling however i gave the wrong email- ill tell you over msn tomorrow Grant

but i tried to sign bow up but i got error again

whats going on?

[james...venom]

24th, 25th & 26th May 2008 - Robo Challenge

what error message are you getting?

[dragonmaster_1]

24th, 25th & 26th May 2008 - Robo Challenge

Same problem as alex signed 1 robot up tryed to sign another up error message

[grant_ploughbot]

24th, 25th & 26th May 2008 - Robo Challenge

hmm, ive just tried it again a few times, first one worked, then after it didnt. If you go off the site and back on it seems to work again. Very strange, dave young is currently looking into it.

[beast]

24th, 25th & 26th May 2008 - Robo Challenge

okits working for me entered 2 bots


shane can you enter phinix

[swanaldo]

24th, 25th & 26th May 2008 - Robo Challenge

Phoenix john. will test at oldham and see. you know the future for Phoenix so wouldnt want it damaging too much eh

[psycho_fling]

24th, 25th & 26th May 2008 - Robo Challenge

yeh that works Grant, going off the site and back on again

both robots signed up

[cliveb]

24th, 25th & 26th May 2008 - Robo Challenge

Gone through ok this morning

[teamshock]

24th, 25th & 26th May 2008 - Robo Challenge

Whirlpool is signed up along with the new, much lighter Aftershock- we have been removing most of the steel chassis and replacing with HDPE and so far it seems to be ok.

Whirlpool will also get some new sides made up with the all new spinner protection.

Also my school is currently building a robot to enter which wil sign up next week.

Will
http://www.teamshock.4mg.comwww.teamshock.4mg.com