2.4 ghz dss

[cnc_machinist_andy]

hey all. im new to this so bear with me if its been answered before.
how can i tell if a tx/rx control conforms to 2.4ghz dss

what do i need to look for ?
ive seen plenty of controllers but have no idea if they would be suitable... help

cheers all

[geeza]

Most modern ones are, I suggest just reading the site or manufacturer website. Or if buying from a shop just ask.

[cnc_machinist_andy]

Thanks. Ive seen hdsma etc after the 2.4 ghz and similar info but still unsure.

[geeza]

The next most important thing is that the set you buy will fail safe to a pre-programmed position not its last known position.

[cnc_machinist_andy]

Would those people who have transmitters be kind enough to post up if it fail safes on all channels pls?

[R9000]

Pretty sure the most commonly used one here is the Spektrum DX6i (and as such, is the one I bought). It's got all the features you'll need.

[leorcc]

Flysky FS-i6 or Turnigy TGY-i6 (same thing) does as well. And it recovers from failsafe much quicker than Spektrum does.

[cnc_machinist_andy]

cheers guys