Tweet
Because of recent happenings and struggles I've been having with this printer, things have got to the point where I cannot afford to spend more money on this printer than I have been the past few months. So I am seeing if there's anyone willing to take this Up Plus 2 with minor faults off my hands.
Please note that this printer will need looking at or refurbishment by the manufacturer.
Minor faults listed:
Other than the issues, the printer itself will be in good working & printing condition when the minor faults are fixed.
Also including lots of spares:
Specifications:
If anyone is willing to take this off my hands, PM any offers.
IMG_2490.jpgIMG_2491.jpgIMG_2492.jpg
Please note that this printer will need looking at or refurbishment by the manufacturer.
Minor faults listed:
- Stops after "Nozzle too hot" during printing, eveything will then cool down afterwards
- Nozzle detect is off by approx 1.3mm., will need manually adjusting/reduced before printing.
- Nozzle will be picked up as 394° even if completely cool.
Other than the issues, the printer itself will be in good working & printing condition when the minor faults are fixed.
Also including lots of spares:
- Hotends
- Partial Printer heads
- Fans
- Motors
- Printhead boards
- and more
Specifications:
- Machine dimensions: (W) 245 x (D) 260 x (H) 350mm
- Build volume: (W) 140 x (D) 140 x (H) 135mm
- Print material: 1.75mm ABS filament or PLA filament
- Layer thickness: 0.15 / 0.20 / 0.25 / 0.30 / 0.40mm
- Easy to use software - import .STL files from your CAD software
If anyone is willing to take this off my hands, PM any offers.
IMG_2490.jpgIMG_2491.jpgIMG_2492.jpg