Tweet
Clearing out a load of my old gear, hoping to concentrate on one or two robots at a time and can't see me getting to use a lot of it.
------------------------------------------------------------------------------------------------------------------------------------------------
Eric Jr - Featherweight
Originally shockwave (I think?) made by Will Thomas but has been updated over the years. Was my main robot alongside Cicatrix for about 3 years that I used at non spinner events. Its a LP pneumatic flipper that includes.
Trev Regulator
Ram
Solenoid
Scorpion XL ESC
Gimson GR01's
Gimson Wheels
Battleswitch
20oz Paintball tank
BEC (scorpion BECs at the time were unreliable)
and maybe more that I cant remember right now....
10mm Polycarbonate all round except the flipper arm. Needs a bit of work to get it going, but as it needs upgrading anyway the new owner may want it as is. If I have the time I'll do a bit of work on it if the new owner wants to get it a bit closer to battle ready. At the moment it doesn't have a battery or radio gear, but I do have some that could be added in with the sale.
SOLD
------------------------------------------------------------------------------------------------------------------------------------------------
Scot Bots MW
Formally Tanto Jr MW but we had plans to make it into a HW(ish) to be used as a house robot but wondering if it could be better served elsewhere. Aluminium frame with 5-6mm Hardox and go kart tyres. Was recently painted in gold and blue....because its what we had. Used 2 x Bosch 400's for drive. Plan was to power it from a set of LiPos that I bought, but again, considering letting someone else have a go with it instead.
SOLD
------------------------------------------------------------------------------------------------------------------------------------------------
T-Bone HW
Former Robot Wars Robot T-Bone, consists of the HDPE shell, scoop, weapon motor, motor pods and weapon assembly. I have a set of wheels that can be thrown in too. Will need a lot of work to get it going as its pretty much just a shell, but I've a different angle to go on now with HWs. Will most likely need to be collected.
SOLD
------------------------------------------------------------------------------------------------------------------------------------------------
2x Optipower 6S 5000mAh LiPo
Pretty much says it all, with deans connectors added. Bought from Terry on here recently but too big for my robot, really need a 5S instead. Bought for £60 a piece, haven't been used so would ask for the same back
SOLD
------------------------------------------------------------------------------------------------------------------------------------------------
2x 24v 3Ah NiCad HW Pack
Originally from Tanto Jr, old school packs that I will make sure still work properly before sending. Not modern technology by any means, but cheap so could be ok for someone looking for a start.
SOLD
------------------------------------------------------------------------------------------------------------------------------------------------
Gimson GLA6000 Linear Actuators
100mm stroke. Intended to go on the Housebot, but its been years so again....might as well give someone else a go. Similar actuators on eBay going for about £99.
Specs from Gimson Robotics: http://www.gimsonrobotics.co.uk/GLA6...-actuator.html
SOLD
------------------------------------------------------------------------------------------------------------------------------------------------
"Marine" ESCs
A pair of these : http://www.ebay.co.uk/itm/JP-Marine-...wAAOSwwpdW8Uwc
Came with Eric Jr before I upgraded to an XL. Could drive a basic drill driven robot easily enough, in Eric Jr they originally controlled the drive consisting of 2 drill motors with 75mm wheels at 14.4v. Plan was to use them on the LinAcs in the Housebot but would work nicely for drive too.
£40 the pair
------------------------------------------------------------------------------------------------------------------------------------------------
NiMH Battery 9.6v
Cicatrix backup battery, no longer needed as I would upgrade if I ever decided to change Cicatrix. Might be useful to someone. Tape was just there to tell me whether that was set A or set B
SOLD
------------------------------------------------------------------------------------------------------------------------------------------------
Prices don't include postage. I have more to add....but that's taken ages so i'll do it another time!
------------------------------------------------------------------------------------------------------------------------------------------------
Eric Jr - Featherweight
Originally shockwave (I think?) made by Will Thomas but has been updated over the years. Was my main robot alongside Cicatrix for about 3 years that I used at non spinner events. Its a LP pneumatic flipper that includes.
Trev Regulator
Ram
Solenoid
Scorpion XL ESC
Gimson GR01's
Gimson Wheels
Battleswitch
20oz Paintball tank
BEC (scorpion BECs at the time were unreliable)
and maybe more that I cant remember right now....
10mm Polycarbonate all round except the flipper arm. Needs a bit of work to get it going, but as it needs upgrading anyway the new owner may want it as is. If I have the time I'll do a bit of work on it if the new owner wants to get it a bit closer to battle ready. At the moment it doesn't have a battery or radio gear, but I do have some that could be added in with the sale.
SOLD
------------------------------------------------------------------------------------------------------------------------------------------------
Scot Bots MW
Formally Tanto Jr MW but we had plans to make it into a HW(ish) to be used as a house robot but wondering if it could be better served elsewhere. Aluminium frame with 5-6mm Hardox and go kart tyres. Was recently painted in gold and blue....because its what we had. Used 2 x Bosch 400's for drive. Plan was to power it from a set of LiPos that I bought, but again, considering letting someone else have a go with it instead.
SOLD
------------------------------------------------------------------------------------------------------------------------------------------------
T-Bone HW
Former Robot Wars Robot T-Bone, consists of the HDPE shell, scoop, weapon motor, motor pods and weapon assembly. I have a set of wheels that can be thrown in too. Will need a lot of work to get it going as its pretty much just a shell, but I've a different angle to go on now with HWs. Will most likely need to be collected.
SOLD
------------------------------------------------------------------------------------------------------------------------------------------------
2x Optipower 6S 5000mAh LiPo
Pretty much says it all, with deans connectors added. Bought from Terry on here recently but too big for my robot, really need a 5S instead. Bought for £60 a piece, haven't been used so would ask for the same back
SOLD
------------------------------------------------------------------------------------------------------------------------------------------------
2x 24v 3Ah NiCad HW Pack
Originally from Tanto Jr, old school packs that I will make sure still work properly before sending. Not modern technology by any means, but cheap so could be ok for someone looking for a start.
SOLD
------------------------------------------------------------------------------------------------------------------------------------------------
Gimson GLA6000 Linear Actuators
100mm stroke. Intended to go on the Housebot, but its been years so again....might as well give someone else a go. Similar actuators on eBay going for about £99.
Specs from Gimson Robotics: http://www.gimsonrobotics.co.uk/GLA6...-actuator.html
SOLD
------------------------------------------------------------------------------------------------------------------------------------------------
"Marine" ESCs
A pair of these : http://www.ebay.co.uk/itm/JP-Marine-...wAAOSwwpdW8Uwc
Came with Eric Jr before I upgraded to an XL. Could drive a basic drill driven robot easily enough, in Eric Jr they originally controlled the drive consisting of 2 drill motors with 75mm wheels at 14.4v. Plan was to use them on the LinAcs in the Housebot but would work nicely for drive too.
£40 the pair
------------------------------------------------------------------------------------------------------------------------------------------------
NiMH Battery 9.6v
Cicatrix backup battery, no longer needed as I would upgrade if I ever decided to change Cicatrix. Might be useful to someone. Tape was just there to tell me whether that was set A or set B
SOLD
------------------------------------------------------------------------------------------------------------------------------------------------
Prices don't include postage. I have more to add....but that's taken ages so i'll do it another time!
Comment