Time for a clear out

[typhoon_driver]

Time to clear out some of the bits and pieces taking up space that I haven't used in a while.

- Thunder power TP 1010C charger and balancer. An older lipo charger but still a good one. Will handle up to 10s pack size and charge at 220w (depends on pack size for current).
- Hyperion Vx G3 lipo pack. 4200mAh, 5s, 35C discharge.
- Perm 080 motors. 1 working, 1 for spares or repair.

Pictures to follow along with other bits and pieces as I come across them. PM me with offers / questions.

[typhoon_driver]

Finally got around to taking pictures and pulling out some other bits and pieces that I'm happy to let go.

http://imgur.com/a/B7mWV

So in summary,

- Thunder power TP 1010C charger and balancer. An older lipo charger but still a good one. Will handle up to 10s pack size and charge at 220w (depends on pack size for current).
- Hyperion Vx G3 lipo pack. 4200mAh, 5s, 35C discharge.
- Turnigy nano packs - 5s, 2.7Ah X2 (used for drum in boner)
- Turnigy nano pack - 6s, 1.3Ah (used for drive in boner)
- Perm 080 motors. 1 working, 1 for spares or repair.
- Mix of bane bots wheels, some used some not, some with nuts for drills in the middle, some not.
- Two linear actuators that I was going to use with the SMIDSY rebuild that never happened. Suitable for feather or heavy.
- 1 low pressure ram
- Melty brain feather disc and electronics (open source)

If you want any more info on any of the above or want to make an offer then please drop me a PM.

[rackers1992]

How much would you want for the linear actuators? (also what is their stroke/reach?)

[typhoon_driver]

Tim I'm afraid the linear actuators have been sold.

[adz600]

just watch you win series 7 on my skybox from last night, what happened to the perm mate ?

[typhoon_driver]

I ran it no load on 8s. Didn't seem to like that as it started spitting copper out at me. Cue a quick change out to an etek.

[typhoon_driver]

Charger sold

[typhoon_driver]

Still got all the lipo, wheels, pneumatic ram and melty brain project available.

[Prophet Of Doom]

....And the big ones please

[typhoon_driver]

Small ones are 3-7/8"
large ones are 4-7/8"

[typhoon_driver]

Working Perm has been sold!

[Wilko9876]

How much for wheels and charger mate

[typhoon_driver]

Mark, charger is long sold I'm afraid. Which wheels are you interested in?

[Wilko9876]

Smaller ones and no problem about the charger

[typhoon_driver]

PM sent