Tweet
OK, been clearing out the shed today. re-evaluating what we're going to do and how we're going to get there. As with most who've been doing this a while we've accumulated masses of stuff which now needs to go.
I'll list stuff as we get to it /take it apart/fix it so it works etc. but here's the first lot.
1. Robot Chasis - Comes from a robot we ran once at Aylesbury called Fireman Sam. It shattered the worm drive axe mech we'd stuck together and never ran again. Before this it was a mini firestorm. It's got a 6mm thick ali base and bulkheads designed to fit the Bosch 35W gearboxes listed later. Bulkheads are the same 6mm ali. Body shell is 1.5mm (i think) stainless steel. All needs bolting back in place. - £30
IMG_0856.jpg
2. Bosch 35W gear boxes, will fit the chasis above. These have the plastic gears in the so i'd run at 12/14.4V but you can run up to 24V. - £20 each
IMG_0872.jpg
3. 200mm x 50mm (200-50) tyres and inner tubes. I think these were Hydras original wheels but I've never had the hubs for them. £10 for all four.
IMG_0857.jpg
4. Wound rotors for 750W Bosch motors. These have the shaft ground down to 11mm and have a key way in them to fit a gear box. Windings are good and haven't been used much. Surface rust on ends of shaft but fairly good condition - £30 each
IMG_0858.jpg
5. 2 x 24V battle packs. 5 x 4 arrangement. These are old and have been sat in the shed for a long time. Not sure if they charge well, hold their charge or what. So selling as spares as someone will be able to salvage cells if the want them so £10 each.
IMG_0859.jpg
More to follow
Andy
I'll list stuff as we get to it /take it apart/fix it so it works etc. but here's the first lot.
1. Robot Chasis - Comes from a robot we ran once at Aylesbury called Fireman Sam. It shattered the worm drive axe mech we'd stuck together and never ran again. Before this it was a mini firestorm. It's got a 6mm thick ali base and bulkheads designed to fit the Bosch 35W gearboxes listed later. Bulkheads are the same 6mm ali. Body shell is 1.5mm (i think) stainless steel. All needs bolting back in place. - £30
IMG_0856.jpg
2. Bosch 35W gear boxes, will fit the chasis above. These have the plastic gears in the so i'd run at 12/14.4V but you can run up to 24V. - £20 each
IMG_0872.jpg
3. 200mm x 50mm (200-50) tyres and inner tubes. I think these were Hydras original wheels but I've never had the hubs for them. £10 for all four.
IMG_0857.jpg
4. Wound rotors for 750W Bosch motors. These have the shaft ground down to 11mm and have a key way in them to fit a gear box. Windings are good and haven't been used much. Surface rust on ends of shaft but fairly good condition - £30 each
IMG_0858.jpg
5. 2 x 24V battle packs. 5 x 4 arrangement. These are old and have been sat in the shed for a long time. Not sure if they charge well, hold their charge or what. So selling as spares as someone will be able to salvage cells if the want them so £10 each.
IMG_0859.jpg
More to follow
Andy
Comment