Steel FP rams and buffertanks

[maddox10]

Steel FP rams, 50mm bore, 100mm stroke.
These were custom made for the Clusterbot V³ what never came to be, after years of gathering dust, these old school FP rams came back, and 2 are for sale. Adaptation to the new machine can be done in a pinch.

2 Double sodastream Buffertanks with mounting and PRV (picture follows)

1 3L FP buffertank from Obsidian also with PRV and several in and outlets.

1 1.7L FP buffertank with 3/4 BSP female tread.

[jonny]

Re: Steel FP rams and buffertanks

what do the rams weigh?

[jonny]

Re: Steel FP rams and buffertanks

can you put up/email the picture of the sodastream buffer tank?

[maddox10]

Re: Steel FP rams and buffertanks

The FP rams, with the current pivotpoint at the bottom ,were ment for the classic setup, and in a 33kg clusterpart, so they are a tad heavy to current norm. 1.2 kg. But they can be brought down to less than 1 kg if they get rebuild to Gravity style.




The Sodastream buffertanks were ment to be used in a heavy with very little internal space.
This one (of 2) weights 1.7 kg, each sodastream bottle is 650 grams for 0.650L volume (L320mm D60mm total length 365mm).

[jonny]

Re: Steel FP rams and buffertanks

thanks, what's are the port sizes on the rams?

[maddox10]

Re: Steel FP rams and buffertanks

Whatever ports you need.
These are custom, and can be customized further. After all, those are steel, and that just takes an anglegrinder and a welder to put other ports on them.

[jonny]

Re: Steel FP rams and buffertanks

cool, could you tell me the dimensions of the rams excluding rear pivot?

[maddox10]

Re: Steel FP rams and buffertanks

No , I can't.


Just kidding.
OD on the collar is 72mm , total length without pivot 140mm ( not surprising, with a stroke of 100mm. 5mm bottom plate, 17mm piston and 12 lid + the rest in sticking out rod)

[jonny]

Re: Steel FP rams and buffertanks

thanks, email sent

[maddox10]

Re: Steel FP rams and buffertanks

And answered.

[maddox10]

Re: Steel FP rams and buffertanks

1 ram sold.

[maddox10]

Re: Steel FP rams and buffertanks

Due to entousiasm, 1 aluminium , 3/8 BSP foot PRV available.

[maddox10]

Re: Steel FP rams and buffertanks



3/8 bsp foot. Set at 1000 psi, weight 40 grams

[maddox10]

Re: Steel FP rams and buffertanks

1 featherweight 12oz buffertanked paintballbottle, 1 Heavyweight buffertank and 1 steel 50*100 ram available.

[maddox10]

Re: Steel FP rams and buffertanks

Did some digging,recovered a double 63*160 ram, Brand Norgren, 16 bar max. With pivots and QEV's.