Tweet
Getting shot of a few bits and pieces to help fund Daiske II.
First of all: Daiske
Daiske ran at the UK FW Champs this year and was a solid robot that didn't break down, nice and easy to maintain as its nice and simple. Ideal for a newcomer looking for some driving practise and just get in the ring or maybe a clusterbot. For anyone who hasn't seen it its a basic 2WD wedge. Originally crafted by Alex Marler.
Contents are:
2x Komo drill motors
82mm (or so) wheels
Sabertooth ESC
2x 7.2v 4300mAh batteries
15mm RG1000 armour
3mm Aluminium baseplate
12v Powerlight
Removable link
Can also provide alternative armour made from wood and polycarb
Might have forgotten a few bits there, but basically comes complete minus radio gear. The robots innards allow for a 4WD upgrade, wheel holes already cut for that.
Second, 2WD pneumatic flipper robot
Welded alumiuium chassis with mounted pneumatic ram, was originally going to run it as my first bot but didn't really fancy pneumatics so just used all the innards to create Cicatrix. Will get back to you on the bore and strong of the ram
Third Zippy Li-Po
11.1v Li-Po battery, currently has no connected attached.
Fourth, Pneumatic tubing, 1.5m of it.
Fifth, Komo drills and mounts
I have heard they are ideal for beetleweights, there mounts have a motor mount and also shaft mount, shaft mounting has needle roller bearings for better efficiency and also mean you don't need to mount blocks after the wheels for support.
Sixth, 10 bar Pneumatic regulator
Seventh, Purple pneumatic ram (not that the purple is important, just so you know which one I mean) again, I will get back to you on bore and stroke.
Eighth, Drill motor batteries, 12v 1000mAh rating, have 6 of them.
Ninth, Pneumatic filling kit, not sure if its any use to anyone or not.
Tenth, 2 screw top pneumatic bottles, cant remember the exact size or anything, so will get back to you on that again if anyone is interested.
Lastly Various smaller pneumatic components
Originally came with the feather mentioned earlier and would sell together if requested.
Sorry about how vague some of my descriptions are, took me ages to write this list and I am getting quite tired. Updates and more items to follow.
First of all: Daiske
Daiske ran at the UK FW Champs this year and was a solid robot that didn't break down, nice and easy to maintain as its nice and simple. Ideal for a newcomer looking for some driving practise and just get in the ring or maybe a clusterbot. For anyone who hasn't seen it its a basic 2WD wedge. Originally crafted by Alex Marler.
Contents are:
2x Komo drill motors
82mm (or so) wheels
Sabertooth ESC
2x 7.2v 4300mAh batteries
15mm RG1000 armour
3mm Aluminium baseplate
12v Powerlight
Removable link
Can also provide alternative armour made from wood and polycarb
Might have forgotten a few bits there, but basically comes complete minus radio gear. The robots innards allow for a 4WD upgrade, wheel holes already cut for that.
Second, 2WD pneumatic flipper robot
Welded alumiuium chassis with mounted pneumatic ram, was originally going to run it as my first bot but didn't really fancy pneumatics so just used all the innards to create Cicatrix. Will get back to you on the bore and strong of the ram
Third Zippy Li-Po
11.1v Li-Po battery, currently has no connected attached.
Fourth, Pneumatic tubing, 1.5m of it.
Fifth, Komo drills and mounts
I have heard they are ideal for beetleweights, there mounts have a motor mount and also shaft mount, shaft mounting has needle roller bearings for better efficiency and also mean you don't need to mount blocks after the wheels for support.
Sixth, 10 bar Pneumatic regulator
Seventh, Purple pneumatic ram (not that the purple is important, just so you know which one I mean) again, I will get back to you on bore and stroke.
Eighth, Drill motor batteries, 12v 1000mAh rating, have 6 of them.
Ninth, Pneumatic filling kit, not sure if its any use to anyone or not.
Tenth, 2 screw top pneumatic bottles, cant remember the exact size or anything, so will get back to you on that again if anyone is interested.
Lastly Various smaller pneumatic components
Originally came with the feather mentioned earlier and would sell together if requested.
Sorry about how vague some of my descriptions are, took me ages to write this list and I am getting quite tired. Updates and more items to follow.
. I'm afraid Jamie that Matt has first refusal at the moment as he did express interest first, even if not publicly just to fool you all.
.
Comment