Team Hydra Sale

[robotwars]

Re: Team Hydra Sale

All being well the spinner will be running at Portsmouth, but not enough hours in the day at the moment !!!

[widow_twanky]

Re: Team Hydra Sale

SMIDSY has left the building

(and John knows far more about building a stermy archer (bicycle drum gears) gearboxes than he every thought he would )

[widow_twanky]

January Sale

OK, been sorting stuff out and this is going to take a few posts but it's January Sale time!!

First up we have the transmitters:

2 x hobbyking 2.4ghz sets complete with receiver. Nice starter set and cheap receivers if you can get them. No mixer though. Cheapish build quality but you get what you pay for. £15 each.

Same as this one but a slightly earlier set: http://www.hobbyking.com/hobbyking/stor ... oduct=8338

1 x Spektrum DX6. It's a mode 1 set which has had the spring moved so you can use single stick on the right hand side. Has battery in it too. £45

2 x Spektrun DX5e's. Both had the channel 5 switch replaced for something a bit more durable than they come with normally. £30each

Postage is extra but we can take to events (Barnsley and Leicester)

[widow_twanky]

Re: Team Hydra Sale

Next up are the chargers & power supplies:

5 x Ripmax Supernova chargers. Does 1-15nicd/nimh cells and runs off 12v power supply. £25each

1 x modified computer power supply unit. will charge about 100 antweight batteries or about a 7.2v nimh battery when using the supernova chargers. If you want it let meknow and you can buy Luke and Colin an ice cream or something.

2 x Astroflight 112delux chargers. One has the dial thingy broken off but easily adjustable with thumb or you can replace it easily. Apart from that it works fine - £60. One has a dodgy screen. The left half clearly shows the current settings etc but the right hand is broken and unreadable works fine though - £40

6 x A123 lipodapters for charging A123 batteries using any nimh charger (including the supernova's above). Nice and easy to use some fitted with bananna plugs, some with grey andersons. £22 each

[gchachanidze]

Re: Team Hydra Sale

PM sent

[widow_twanky]

Re: Team Hydra Sale

Got the specs on the supernova chargers wrong!!

Full specs are:

Fast Charge / Discharge 1 to 25 Cell NiCad / Ni-MH , 2 to 12V Lead Acid Batteries
Auto Discharge / Charge
0.1A to 5.0A Self Limiting Charge Current
0.1A to 3.0A Self Limiting Discharge Current
10 Programmable User Definable Memories
2 Line LCD, 16 characters per line
Full Status Check functionality including-
Average Voltage
Discharge cut-off voltage
Input voltage
Output voltage
Peak voltage
Discharge start voltage
In process Charge / Discharge current adjustment
Delta Peak Detection / Zero Current Voltage Check
Trickle charge functionality
Audible Function Alarm with mute facility
Integral Cooling Fan
10~15V Input Voltage 12v Pb Battery or 10~15v Power Supply
Reverse Polarity Protection on both Input and Output
Overload Protection
Short Circuit Protection / Electronic Shut Off

[widow_twanky]

Re: Team Hydra Sale

I also have:

Seven 120mah 1/3 AAA Graupner batteries. Five with standard receiver plug, one with small jst connector and one with both connected in line - £3 each

Two Spektrum 6100e receivers (the ones with the pins at the end, not the 90 degree ones). Both have been used. Checked them tonight and they bind and work just fine. - £25 each

[widow_twanky]

Re: Team Hydra Sale

I have a couple of big sheets of ti on ebay at the moment.

http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... :MESELX:IT
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... :MESELX:IT

[widow_twanky]

Re: Team Hydra Sale

Got a couple of windscreen wiper motors if anyone wants them. Just postage costs or can drop at an event

[widow_twanky]

Re: Team Hydra Sale

Got a bit of 10bar pneumatic pipe.

Coil sizes are:

3m 6mm pipe (natural colour)
5m 6mm pipe (green)
3m 10mm pipe (green)
2m 10mm pipe (natural colour)
10m 8mm pipe (natural colour)
3m 12mm pipe (green)

[widow_twanky]

Re: Team Hydra Sale

Set of mobility scooter wheels, 250mm diameter x 75mm wide, 3/4 axle with 5mm key way. All ok but i seem to have lost one of the bolts from them.



Four 250mm x 100mm cast aluminium wheels. Drilled out to suit go kart hubs

[widow_twanky]

Re: Team Hydra Sale

low pressure buffer tank made from a 1kg halon bottle. Has a 3/8 outlet.



Two low pressure rams. One 32mm diameter, 50mm stroke, one 40mm diameter, 100mm stroke



On/off valve for paintball bottle. Fits directly onto the standard pin valve.

[jonny]

Re: Team Hydra Sale

if i win the titanium sheet could i collect it from you at burgess hill?

[harry hills]

Re: Team Hydra Sale

how much for the wheels? aluminum and the others

[psychostorm]

Re: Team Hydra Sale

How much for the Rams, on/off valve & the buffer tank?