Ready made robot shell

[psycho_fling]

my sponsors have made a robot shell and put it on ebay link below (very reasonable) if the postage is a problem then if its ok with stedmark i can drop it off at an event

specs;
3mm mild steel
total weight 4.5kg
welded inside and out
100mm high
380mm long
255mm wide

http://cgi.ebay.co.uk/Robot-outer-shell-armour_W0QQitemZ120219187510QQihZ002QQcahttp://cgi.ebay.co.uk/Robot-outer-sh...10QQihZ002QQca tegoryZ294QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

happy bidding!

[john]

Ready made robot shell

get them to come fight it!

[dmac]

Ready made robot shell

It needs to be Gary proof!!!

[geeza]

Ready made robot shell

3mm mild, I dont think so. 5 or 6mm hardox might just do the trick thou.

[grant_ploughbot]

Ready made robot shell

To be honest - you would probably be more than fine with 3mm anyway - spinners might tear bits off - but wont go in deep enough to get the juicy bits.

[typhoon_driver]

Ready made robot shell

I dont need to get into the juicy bits

[dmac]

Ready made robot shell

Is there an option to fit Wings, for Gary,s flying lessons.

[widow_twanky]

Ready made robot shell

I am looking at this and wondering if there is enough space inside for some motors, batteries and after a bit of modification a pneumatic flipper.

Obviously, it depends how you build it but anyone got any comments?

Andy

[grant_ploughbot]

Ready made robot shell

Looking at it there should be room inside. It looks well made and deffinatly enough room for a pusher.

[psycho_fling]

Ready made robot shell

definitly well made, and even if it idi get torn a bit its quite cheap

are you thinking of buying andy?

[widow_twanky]

Ready made robot shell

Yes mate, seems ok and relatively easily to adapt to what I need.

Andy

(Message edited by widow twanky on February 08, 200

[psycho_fling]

Ready made robot shell

was it anyone on here who ended up winning it?

[woody]

Ready made robot shell

Well ...with an ebay handle of boudoirbabe it narrows the field a little.

[leorcc]

Ready made robot shell

Its a boy from Richmond, London. He is active on the http://www.robotwars101.orghttp://www.robotwars101.org forum.

[widow_twanky]

Ready made robot shell

I must admit it got to the point that I may as well buy me an arc welder and do it myself. Still looked good though.