Martyn’s 2nd World Championship qualifiers (sign up)

[siphai]

Martyn’s 2nd World Championship qualifiers (sign up)

If memory serves correctly, wasnt Plasma Nitride Coated Titanium just paint on top of titanium?

[andrewj]

Martyn’s 2nd World Championship qualifiers (sign up)

Yes, but thats not the point. :wink:

[martyn]

Martyn’s 2nd World Championship qualifiers (sign up)

Tim your robots just dont seam realistic enough, i dont know what they just dont seam liek they would work

[team_britespark]

Martyn’s 2nd World Championship qualifiers (sign up)

Manic Monsoon will represetn Wales

Name: Manic Monsoon
Weight: 100kg
Armour: 5mm Hardox all over.
Speed: Roughly 28mph
Shape: Box wedge with side skirts and rounded back.
Weapon 1: A linear actuator powered lifter running by a 4 bar system at 24v. This can lift 200kg easily.
Weapon 2: A small strip of Grade 5 Titanium on the front wedge, which gives 0mm ground clearance.
Strengths: Powerful drive and good strong weapon
Weaknesses: A bit too fast and hard to control when at full speed.
Ground Clearance: 0mm on front and sides, 1cm at back.
Srimech: Invertible, but can self right using the lifter if wanted to.
Notes: The robot is powered by 2 B42-500 MagMotors running at 60v. This gives Monsoon approx 60HP! The robot has a total of 6 wheels, 3 on each side. Each side is linked together by a set of heavy duty belts, giving 0m turning circle and the manoeuvrability of a 2 wheeled bot, and each wheel is coated in Vulcalon. The front wedge is angled at 42.5 degrees, meaning that it is not too steep or too shallow. The lifting arm is powered by a S28-150 MagMotor, and is made from 7075 Aluminium. The lifter itself can lift a total of 200kg, and can self right the robot if needs be. The side skirts are made from 4mm Titanium and are hinged.


Pure Evil: Revenge Of The Disc will represent Portugal

Name: Pure Evil: Revenge of the Disc
Weight: 100kg
Armour: 4mm Titanium ring spinner and 4mm Titanium flipper/wedge.
Speed: 8mph
Shape: It is a ring spinner with a front wedge.
Weapon 1: The main body is a ring spinner made from 4mm Titanium, with Titanium teeth all over it. It is powered by a C40-400 Magmotor running at 36v and geared down 2:1. This means the body can reach a top speed of 3888RPM. The disc weighs a total of 40kg and can dish out 174kJ of energy per hit.
Weapon 2: A spinning kinetic powered flipper, based on Team Whyachi€™s €œWarrior SKF€. It uses the kinetic energy from the disc to power the flipper, meaning it can flip with a total of 58KJ of energy.
Strengths: Unique and powerful weaponry. Good control.
Weaknesses: Takes a long time to self right due to the disc needing to spin up successfully.
Ground Clearance: 0mm at front and sides of flipper, 5mm at back due to ring spinner.
Srimech: The flipper can successfully self right the robot.
Notes: The robot is powered by 2 800w 36v DC motors giving 8mph top speeds. The wheels are made from Vulcalon, and have screws embedded in them to help gain traction on the arena floor. The ring spinner is powered by a C40-400 Magmotor geared down 2:1. This means the body can reach a top speed of 3888RPM. There are 15 1€ cubed Titanium teeth all over the horizontal spinner, giving it 174KJ of energy on impact when used as a spinner. The flipper works because there is an eccentric land on top of the spinning ring. The top link connected to the flipper plate has a groove in it, when fired the top link engages with the spinner land and pulls backward flipping the plate up. At the front of the flipper there is a 4mm Titanium €œnose€ with a sharpened edge designed to get under all skirts and ground clearances. When the spinner is spinning at full speed, the flipper flips with 58kJ of energy. All the electrics are kept within the 50cm diameter of the ring spinner.

[dogbot4000]

Martyn’s 2nd World Championship qualifiers (sign up)

easy ive got smaller drives in simpson. ok Im gonna change the spears into legs which stick out in the top hence making it be invertable. If drillzilla can do it how come us british cant

[majinb]

Martyn’s 2nd World Championship qualifiers (sign up)

Here it is, the all new, al shiny, Back to Rock II!!!

Name - Back to Rock II

Shape - A box with a slightly sloped front

Weight - 100 Kilogram

Speed - 29 km/h (18mph)

Dimensions - 90x75x30 cm

Ground Clearance - 0 at sides and front, 2 mm at the back

Power - 2x Etek motors at 48 volt

Movement - Four wheels, 20cm diameter

Turning Circel - Zero

Weaponry - It has a broad hydraulic lifting arm which can easily lift 200 kg. To easily get underneath an opponent, it has two lifting plates at the bottom of the arm, one on the left end and one on the right end, instead of one large lifting plate like Behemoth.

Between the two plates, in the centre of the scoop, I mounted a vertical diamond edged Pussycat-style blade, powered by a S28-150 Magmotor, spinning upwards at approximately 3000 RPM, which will hopefully rip off some armour, or more likely, a tire, while lifting an opponent. Jamming a blade into an opponent while lifting it hopefully provides as much control over an opponent than a Behemoth-style grabbing claw/axe can, and it€™ll surely do more damage. (To avoid confusion, the blade is actually part of the lifter, so when the lifter moves up, the blade moves along).

On both sides of the bots is a pair of 5 mm titanium skirts, to make sure I won€™t get flipped very often, as hydraulic srimechs just aren€™t as fast as pnuematic ones.

Armour - 6 mm titanium all around

Srimech - The lifter self-rights the robot when needed

Strenghts - Nice weapon synergy, high traction, low ground clearance
Weakness - Hydraulic srimech might prove to be slow

A picture can be found here: http://jupiter.walagata.com/w/madbull/BacktoRockII.gifhttp://jupiter.walagata.com/w/madbull/BacktoRockII.gif


(Message edited by MajinB on August 28, 2005)

[andrewj]

Martyn’s 2nd World Championship qualifiers (sign up)

If drillzilla can do it how come us british cant

DrillZilla was technically a shufflebot not a walker. After DrillZilla competed in the World Championships the rules were changed so that shufflebots got no extra weight advantage. Here in FanFic we decided that was slightly unfair and raised the limit, most tournaments now give shufflers a 150kgs limit. So if you are using shuffling plates instead of walking legs then you are likely to be overweight at 184kgs.

Hope that makes some sort of sense as to why you cant.

Martyn: Is it possible for two of my robots to represent the same country or can I only have one for that country?

(Message edited by andrewj on August 28, 2005)

[swiss_tony]

Martyn’s 2nd World Championship qualifiers (sign up)

Dont count on him getting it, Andy. Hes hopeless.

[andrewj]

Martyn’s 2nd World Championship qualifiers (sign up)

GigaByte 1.5 - England

http://teamcode14.proboards24.com/index.cgi?board=Stats&action=display&thread=111305 1920http://teamcode14.proboards24.com/in...play&thread=11 13051920

GeForce 3.0 - The Netherlands

http://teamcode14.proboards24.com/index.cgi?board=Stats&action=display&thread=110374 4327http://teamcode14.proboards24.com/in...play&thread=11 03744327

FP4.0 - Australia

http://teamcode14.proboards24.com/index.cgi?board=Stats&action=display&thread=110374 4077http://teamcode14.proboards24.com/in...play&thread=11 03744077

[martyn]

Martyn’s 2nd World Championship qualifiers (sign up)

Robots and countries so far

France
Killotine Evo

Italy
Clawdius Decimus Murderous

Scotland
All Scoop And No Stab Make Steve A Dull Boy

The Channel Islands
Seggy 4

Canada
Chalkie 3G

Japan
Tengu

Ecuador
Dante

Netherlands
Axe to fall
Cosmic thunder 2

Belgium
Back to rock

Wales
SYNDOS
Manic Monsoon

Gibraltar
Snake Bite IV

EIRE
Cyclone force 2.5

Mexico
Axe-o-lotl

USA
Cacodemon

Portugal
Pure Evil: Revenge of the Disc

England
Giga Byte 1.5

Australia
Force Power 4

Wales and The Netherlands are full there for Aj Geforce needs to change country

[majinb]

Martyn’s 2nd World Championship qualifiers (sign up)

Name - Axe to Fall

Shape - Take a cylinder, cut it in halve, and then put it on the ground, rectangular side heading downwards. The straight ends are the left and right sides, and are sloped. (Well, just take a look at the picture =P )

Weight - 100 Kilogram

Speed - 24 km/h (15 mph)

Dimensions - 115x80x40 cm (due to axe hanging out, main body is 80x80x40 cm)

Ground Clearance - 0 at front, 7 mm anywhere else

Power - 2x LEM130s at 48v

Movement - Four inner wheels, 10cm diameter

Turning Circle - Zero

Weaponry - The main weapon is a 5 kg double-headed axe on top of the machine, it€™s a steel 80 cm shaft with two diamond edged blades made of hardox on the end of it. The blades are shaped like the Mortis€™ blades, in order to create some nice slices into opposing armour.
The whole axe is powered by 2 nitrogen bottles at 1000 psi, a 1 kg buffer bottle and a 30 mm bore ram, for fast and furious hits, with a downforce of almost 2 ton brought onto a fine blade, and an energy unleash which seems significantly higher than for example Beta€™s if my calculations are right.

At the front of Axe to Fall is a small wedge/ram made out of 8 mm Titanium, to lift my opponent€™s wheels into air while clobbering them with my blade, or perhaps even to grab him. This ram is also my plan B if my axe fails in battle, just ram them hard using my good traction.

Armour - 8 mm Titanium front and 15 mm polycarb for the rest of the bot.
There are also two small blocks of vulcanized rubber on the mid-front and the mid-back of my machine, to absorb the downforce where the axe hits the chassis.


Srimech - The axe acts as a srimech, thanks to the curved shape of the top my bot can self right in no time, even if it has to self right over the wedged front (the wedge is very small mind you).
To make sure my bot won€™t end up on his side, I created a pair of curves on both sides, as can be seen on the picture.

Strengths - Destructive weapon, quick at self righting
Weakness - Weapon only works when opponent is in front of or behind the machine.

http://jupiter.walagata.com/w/madbull/Axe2.gifhttp://jupiter.walagata.com/w/madbull/Axe2.gif

[swiss_tony]

Martyn’s 2nd World Championship qualifiers (sign up)

Representing the USA [Duh]
Jack Kennedy

Representing Japan:
Cyberdemon

Stats here: http://farr.proboards21.com/index.cgi?board=Hitmenhttp://farr.proboards21.com/index.cgi?board=Hitmen

[darkguru]

Martyn’s 2nd World Championship qualifiers (sign up)

Representing Poland: Going Crunch

Representing Spain: Love Bite V2.0

[kevin]

Martyn’s 2nd World Championship qualifiers (sign up)

Name - Wolf

Shape - A box with a sloped front and rear with side skirts. It is invertible also.

Weight - 100 Kilogram

Speed - 35 km/h

Dimensions - 95x80x25 cm

Ground Clearance - 0 at sides and front, 2 mm at the back

Power - 4x Etek motors at 48 volt

Movement - Six wheels, 25cm diameter

Turning Circle - Zero

Weaponry - It has a electric lifting arm which can lift 150 kg (Biohazard style). To easily get underneath an opponent, it has a plate on the bottom of the arm.

On both sides of the bots is a pair of 7 mm titanium skirts, The skirts are low anyway.

Armour - 7 mm titanium all around the body.

Srimech - The lifter self-rights the robot when needed. But it can run inverted. Preferably self-right first.

Colour - navy blue with gold stripes. With a Canada flag on the top.

Strenghts - Useful weapon, good low ground clearance, and great traction on the floor.
Weakness - Ego. Not as effective when inverted.

[andrewj]

Martyn’s 2nd World Championship qualifiers (sign up)

Power - 4x Etek motors at 48 volt
Weight - 100 Kilogram

I think someones dreaming...

And can GeForce represent Jersey please? :P