Tweet
switch out your esc's
-
-
Thanks, been a long day why I didn't try that I don't know.Comment
-
Switched out the ESC's only thing it did was make it go forward pushing the stick left instead of right
anymore help? Currently have it going forwards and backwards on moving stick left and right and turning on moving stick up and down.
mix 1 is aile - aile
mix 2 is elev - elve
trim active on both.Comment
-
Pretty sure you need to do aile - elev and elev - aile, since you're basically mixing the action of one channel into another. Then work out your % values as needed to make the motors go the right way.Comment
-
It's done! Kept my mix 1 and 2 the same and followed the instructions in the picture and it's worked a treat
just need to work out now how to dile it down a bit as it's rapid lol
Comment
-
Look for a function in the transmitter menu called dual rates (or similar). It allows you to set two values that you can toggle between which can be used for reduced speed. So say with the switch off, you get 100% speed, then with the switch on, it limits the speed to 50% (as an example, this is adjustable). You can usually set different rates for different channels, I find it useful to reduce the left/right control more than the fwd/back control as it gives less erratic control when turning but still allows good straight line speed.Comment
Comment