Announcement

Collapse
No announcement yet.

bosch 750w questions

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • bosch 750w questions

    What type of glue to use for the 750 watt magnets( hot glue, epoxy resin super glue)
    And what size dowel rods to put in the retaining springs between the magnets
    Thanks,
    ROB....

  • #2
    Re: bosch 750w questions

    ive never glued the magnets back on such a big motor , but for a drill motor in a FW, I used araldite , which is pretty much just 30 minute epoxy , if you can get hold of some , jb weld should be perfect.

    Comment


    • #3
      Re: bosch 750w questions

      Dowel sizes are 7mm and 6.35mm I think. Have a read of this http://www.technobots.co.uk/Technical/G ... MagMod.htm you should be able to sort the dowels out from there.

      Andy

      Comment


      • #4
        Re: bosch 750w questions

        Thanks Andy
        I take it the dowels are aluminiun too, like the rings.
        and jb weld weld it is then muchalucha

        Comment


        • #5
          Re: bosch 750w questions

          Originally posted by rob
          Thanks Andy
          I take it the dowels are aluminiun too, like the rings.
          and jb weld weld it is then muchalucha
          The dowels in SMIDSY appear to be steel

          Andy

          Comment


          • #6
            Re: bosch 750w questions

            Back in the Day Bulldog always used araldite to glue the magnets and there still glued now !

            even after several severe hits by Hypnodisc they remained in position and intact

            Der Boyz

            Comment


            • #7
              Re: bosch 750w questions

              even after several severe hits by Hypnodisc they remained in position and intact
              Shame the link didn't

              Comment


              • #8
                Re: bosch 750w questions

                Arrrr Jamie ,it never did after, thats the benefits of experience, its when nothing is learned ,that when its sad

                Hypnodisc beat us two times doing what they did best ,the second time they took out a motor,smashed the case oval,

                so -- we moved the motors inboard, after that we took many hits from powerful spinners and none stopped us again,

                even a robot with a lawnmower type drum on the front at Enginuity!!!!!! and kept going through, taking

                serious

                damage, the last one got us though Exterminator, I could and should have done better in that scrap, but got cocky, and

                got what we deserved drove crap, :sad: the rest is history, Bulldog fought more than its share of spinners over the

                years

                everyone taught us new lessons, happy days,

                Der Boyz

                Comment

                Working...
                X