dry powder extinguisher

[plargen]

does any one know wot thread the valve is in the 1kg extinguishers are

[jonny]

Re: dry powder extinguisher

on the bit where the valve screws into the bottle or on the output of the valve?

[plargen]

Re: dry powder extinguisher

between the bottle and the valve because the valve wont be required

[billy breach]

Re: dry powder extinguisher

Is it to be used as a buffer tank?.... you can use the valave thats there, cap one side and thread a T joint where the powder would come out, I think that would be easier than trying to find an adapter for the neck thread of the bottle

[plargen]

Re: dry powder extinguisher

i wanted an adapter to save a bit of weight and space cos i'm using a small compressor to charge up 2 tanks and i getting a pressure sensor to turn the pump off at 150 psi

[jonny]

Re: dry powder extinguisher

It varies on the extinguisher, try and find one with an od on where the valve screws in is close to the od of a 1/2 bsp adapter. Then un screw the valve and jam a 1/2 male bsp adapter in there and araldite up