Speed controller

[Laser]

Re: Speed controller

dont go for the sabertooth if your using 2 drill motors per side.
My 25a one worked fine(ish) on 1 motor per side. But as soon as I put 2 motors per side it blew up.

[Bodge Job]

Re: Speed controller

I used the sabertooth single channel speed controler equivelent controler and 25 amps was fine to run to motors per side, and it has high current cut of (like the other more expensive controlers) which I have dound very useful when motors burn out, I'm running very low on battery, the only problem with them is there lack of cover which you'd need to protect it frOm bashes, but its pretty easy to make one of those. But every ones experiences are different, so in the end, it's you that has to chose what to use.

[maddox10]

Re: Speed controller

The new Scorpion XXL V2is £115 , delivered at the front door, with enclosure and fan.

It's not the cheapest, nor the most powerfull dual speedo. But it's simple to use and we never had a failure with the V1.

[billy breach]

Re: Speed controller

Ok got my two 30p electronize escs today, but on the servo wire the small red and black wires are out the servo pkug, can soneone tell me why and what order the cables should be in?

[harry hills]

Re: Speed controller

white red black

[razerdave]

Re: Speed controller

Some electronize have a servo plug and 2 random wires which turn the BEC on when they are joined.

If they have actually come out of the servo lead, they go back (from left to right) Black, Red, White (Negative, Positive, Signal) with the plug where the metal can be seen.

[billy breach]

Re: Speed controller

Thanks for the help