Building my first robot /W Design Idea.

[AbundantToast]

Hey, there guys I'm new to this fantastic helping forum (I only signed up today). I have been wanting to build a robot for quiet some time now but I just havn't had the advice, money or time to do so... I am a real newby this being my first ever build. I have a little experience in Nitro rc cars and electric also I have had an indoor flyer (Helicopter)

Here are some of my design Ideas:

http://img686.imageshack.us/i/botsideview.jpg/


http://img94.imageshack.us/i/botf.jpg/



Please comment and advise me (I Know my drawing and designing is bad so Shh :P)

I estimated that the components from Robochallenge would set me back about £230 (Without armour, Baseplate weapon etc)

These parts including:

A battle switch,
3 12v drill motors (one for weapon but I may upgradto a 24v)
Verticale and horizontal mounts for the motors,
100mm blue wheels W/ nuts,
The DX5e with reciever,
Red and Black Meter long wires,
A quick charger.

What else am I missing out? and have I got the corret essential components listed? And how much would the baseplate and armour be? (description on diagram)


Thanks
-Jay

[AbundantToast]

Re: Building my first robot /W Design Idea.

Sorry for the double post but I dont think the images worked ;(

Here's the again (Hopefully they'll work this time)





If it doesn't visit them here http://img94.imageshack.us/gal.php?g=botf.jpg

[Leonardomayo]

Re: Building my first robot /W Design Idea.

You forgot batteries :P
Oh and get rid of the [img] tags from the original post so people can just click onto them and see.

[AbundantToast]

Re: Building my first robot /W Design Idea.

Yeah I forgot about that Should I get the one from Robochallenge or invest in a better brand? (I Probally wont have the components till christmas )

[Metal Demons]

Re: Building my first robot /W Design Idea.

You want something a bit more serious than a drill motor - ESPECIALLY a geared down drill motor which won't spin very fast at all - to power a spinning weapon.

If you aren't going into the massive can of worms that is brushless (ludicrously high power to weight ratio, but expensive and prone to regular failures), something like a car fan motor, couple of overvolted speed 900s, or if you're feeling a bit better off a couple of overvolted 18v dewalt motors or such like will give you a creditable weapon.

That's not getting into the really nuts stuff like multi-kilowatt brushless or magmotor setups which the really scary spinners are using, though that will set you back a LOT of money so I wouldn't recommend it for a first robot.

*has massively disregarded that suggestion on berzerker!*

[Thunder arrow]

Re: Building my first robot /W Design Idea.

look on

http://www.technobotsonline.com/

and u forgot a speed controller (or motor controller ( its a thing that controls the speed of the moters)

u will need 3 speed controllers or 1 dual (i would go with sabertooth dual) and 1 single speed controller

but i am NOT AN EXPERT

Theo

[AbundantToast]

Re: Building my first robot /W Design Idea.

Thanks guys, What batterys should I get?

[typhoon_driver]

Re: Building my first robot /W Design Idea.

nimh are probably your best bet as a first option. Car racing packs usually do the job fine and are relatively cheap and difficult to screw up.

Re the mag on a feather spinner, only two feathers have, vortex and hornet and it was a pain fitting the weight in a featherweight so I ended up with a motor that weighed the same as the disc i was using in hornet.

[razerdave]

Re: Building my first robot /W Design Idea.

Actually Gary LS3/Poop-a-Scoop has one as well.

To start with a spinner is a risky move, it may well be worth your while to attend one of our events first and get some information direct from the sources. Whereabouts are you from Jay ?

[AbundantToast]

Re: Building my first robot /W Design Idea.

Hmm, I really not sure what Weapons motor to get any suggestions. (My budget is roghly £300 I could maybe push but I will be building it over a couple of months)

-Jay

[Laser]

Re: Building my first robot /W Design Idea.

You realise that if you have a spinner on your robot you can only enter 2 events a year

[AbundantToast]

Re: Building my first robot /W Design Idea.

I live in harlow which is about 30 minutes from london.

[Laser]

Re: Building my first robot /W Design Idea.

It's got nothing to do where you live it's only that theres one arena in the country that can take spinners (you have a drum spinner on the front of your robot by the looks of it) and that arena only does 2 events in the year.

[AbundantToast]

Re: Building my first robot /W Design Idea.

Only two events? Well... what about an axe? Or even maybe a pneumatic driven spike?

[Laser]

Re: Building my first robot /W Design Idea.

an axe is good or you can have a flipper/lifter but a pneumatic driven spike, I dont know...