robot

[Laser]

Hi again guys. After a long think im going to buid a antweight to get into robotics then hopefully near christmas i'll start building a featherweight. I've looked at pneumatics for a flipper and thought it was too much and too complicated for a first bot, so im gonna build a ram bot (measuring 40cmX30cmX15cm) with a ramp on the front.
the frame is gonna be made out of wood and the amour is going to be 6mm nylon 6.
for speedos I dont know what to get out of the electronize FR15HVR or the sabertoothdual 25a which is better
I'm using 12v cordless drill motors(already been ruining my dads old drills He He..).
Ill use my Spektrum DX5e for my ant and subscribe to RCM&E (im into RC Planes) and get a free Planet 5 transmiter then buy the reciever for my FW.
Icould go cheap and buy these wheels http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... K:MEWAX:IT
or buy 2 blue wheels with nut insert and 2 ball bearings.

Thanks

[Bodge Job]

Re: robot

those wheels http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... K:MEWAX:IT won't fit on to drill motors directly but the Robo Challenge €˜Blue wheels€™ with nut insert. will. http://web.me.com/robochallenge/Robo_Ch ... nical.html (3rd down)
the ebay wheels are cheep so you could buy them and use them for something else.

[Laser]

Re: robot

sorry the design is for the featherwieght

[Bodge Job]

Re: robot

yes I Just read that

[Metal Demons]

Re: robot

If you're building a simple pusher with 2 or 4 drills you will have loads of weight left over with wood and 6mm nylon armour - not to mention that if you're thinking of entering an event which has spinners running, 6mm of nylon will put up about as much resistance to a heavy spinning blade as a bunch of slightly damp tissue paper.

In other words, get yourself thick plates of a decent aluminium alloy (15mm+ of a 7000 series will do), or some hardox or a similar toughened alloy steel. There are plenty of people on here with some knocking about.

[Laser]

Re: robot

i wont be entering events with spinners and i could put aliminum on the outside of the armour as reinforcement.

[Bodge Job]

Re: robot

I would have it less than 100mm tall so you can use 100mm blue wheels so they stick out the top and bottom so you can drive up side down

[Laser]

Re: robot

that is a good idea alex and i have thought about what happened if i got flipped ands talked to my dad about it i could make 90mm high but at that kind of hight the ramp wont have enough angle to make robots go airborne.

[Bodge Job]

Re: robot

you could shorten the ramp

[Laser]

Re: robot

that would work

[psycho_fling]

Re: robot

Ill use my Spektrum DX5e for my ant and subscribe to RCM&E (im into RC Planes) and get a free Planet 5 transmiter then buy the reciever for my FW.

just wondering what you meant by the above comment the free part especially????

[Laser]

Re: robot

I was talking about the the radio systems and RCM&E(a plane magazine) have a special subscription offer where you get a free planet 5 transmitter if you subsribe

[Laser]

Re: robot

hi guys ive got a question what is better for armour HDPE or nylon 6 and what thickness should i get for my FW

[craig_colliass]

Re: robot

HDPE
10-15mm

[Bodge Job]

Re: robot

I have got 6mm hdpe for the top and bottom and 20mm (22mm realy) Nylon 6 for front, back, sides and frame