Attaching gear to shaft

[tam10]

Attaching gear to shaft

Ah ok. The bore is 6mm, same as the shaft, so its not loose or tight.

I suppose the loctite is worth a try at least!

Thanks for everybodys help.

[grant_ploughbot]

Attaching gear to shaft

Ive recently done that on a much smaller motor and tried to remove the gear (which was a loose fit before). I had to cut the gear in half to get it off

[mightymouse]

Attaching gear to shaft

Loctite 603

Trev

[beast]

Attaching gear to shaft

put a ball bearing over your hole in gear hit it with a hammer which will make it smaller then press it on with loctite as well better to weld it tho

[tam10]

Attaching gear to shaft

Ah good idea! Ill have to find a ball bearing though. Probably got one somewhere.

Now, Loctite 603 or Green Loctite?

[Kenny]

Attaching gear to shaft

im sure if you went to any welding company they would tack it up for you for free

[tam10]

Attaching gear to shaft

Thats the thing though, I dont know of any welding company near here/cant find one!

[typhoon_driver]

Attaching gear to shaft

yellow pages and the internet

[tom_kane]

Attaching gear to shaft

If you€™re going to take up roboting seriously, buy a welder off ebay or something. Then learn