Hardox & Feathers

[widow_twanky]

Can anyone tell me how much hardox weighs?

I am just realy looking for weight for a square meter so i can do an approximation of how much the shell will weigh. (Probably about 3mm thick).

Andy

[grant_ploughbot]

Hardox & Feathers

the weight is pretty much the same as stainless steel. i cant remember figures off my head though.

[typhoon_driver]

Hardox & Feathers

http://www.hardox.com/templates/brochures/InformationMaterial____14957.aspxhttp://www.hardox.com/templates/broc...____14957.aspx

3.2mm is the thinnest you can get but it is very expensive compared to the thicker pieces. I would recommend looking at 4mm plus

[maddox]

Hardox & Feathers

8 kg dm³.

A sheet 1m² of 3.2mm is 25.6 kg. A 1m² 4mm sheet is 32.108 kg.

[widow_twanky]

Hardox & Feathers

Thanks for that.

Andy

[johnny_boy]

Hardox & Feathers

The correct figure for carbon steel is 7.85 kg/mcu. A 1000 x 1000 x 3.2mm sheet would weigh 25.12 kgs. If you struggle to get hold of some then let me know. I have a contact who may be able to offer some off cuts of 3.2mm Hardox 450.
John

[woody]

Hardox & Feathers

I have a contact who may be able to offer some off cuts of 3.2mm Hardox 450.

Im assuming that your ...John Gregory
Regional Sales Manager, Central UK.

Well if you cant acquire some then no one can ...

If you struggle to get hold of some then let me know

Post some sizes and prices and Im fairly confident that youll get some takers ... 3.2mm seems relatively rare.

Regards Alan

(Message edited by woody on February 07, 200

[johnny_boy]

Hardox & Feathers

Check the web for ABBA Commercials Ltd. Ask them for a price on an off cut. I dont sell it in small bits, as I bring it into the UK in 7.5mx2.5mx3.2mm plates.

[woody]

Hardox & Feathers

Tah!