Wireing the receiver and speedos

[Guest]

Hi everyone.

I have a problem wiring my speedos to my receiver.Can someone tell me how to do it?

Thanks.

Dan.

[maddox]

Wireing the receiver and speedos

???? What speedos?

Normaly you have 1 3wire cable from the speedo, with a little black plug on it. This should go into the reciever. The choise of plugin you make will decide what stick or button will control it.

[Guest]

Wireing the receiver and speedos

My speedos are sonik marine 25amp.I have tried what you said.

[woody]

Wireing the receiver and speedos

Can you check the reciever works with a servo and battery?

[dmac]

Wireing the receiver and speedos

What way round did you fit the plug into the receiver. Black wire usually goes to the outside edge of the RX.

[woody]

Wireing the receiver and speedos

Dan your not using more than 12 volts supply are you?
Can you try with just one Mtronik ....if you havent already.

[grant_ploughbot]

Wireing the receiver and speedos

I cant remember if your speedos have them or not, but are there 2 very thin black wires comming out to a switch? if so, turn one switch on and the switch on the other speedo off. That will supply power to your receiver if your not using a seperate battery pack.
Also, just double check that you have plugged them in the correct way around - it can switch depending on your receiever.
(ill send the e-meil with rack info etc later)

[john_frizell]

Wireing the receiver and speedos

Dan,

Is this all sorted now or would you like some advice?

[Guest]

Wireing the receiver and speedos

Thanks eveybody.All fine now.