Featherweight Database

[dragonmaster_1]

Featherweight Database

Just finishing the rebuild of Dragon2 Drive 4 18v drill motors run at 24v. Armour front 20mm nylon and 10mm Ti. Sides and rear 20mm nylon and 4mm Hardox. Bottom 4mm ali Top 3mm poly and 1.2mm Ti. Now to put together the new sorry the 2 new spinners.

[dragonmaster_1]

Featherweight Database

New picture on profile of the new DragonStrike on the left. Kishar on the right. Will be Ready for this weekend.

[anukhet]

Featherweight Database

Oh bloody hell! I hate spinners! :wink:

[flippt]

Featherweight Database

Double trouble

[robotic_ants]

Featherweight Database

Pleh!

(Message edited by Robotic_Ants on October 26, 2005)

[dragonmaster_1]

Featherweight Database

Just tested the disc on DS scary very scary

[robjones]

Featherweight Database

Having had no end of problems with microCHIPs drive motors Ive now gone with drill motors. Im fitting in a pair of James Coopers drill motors. So far so good. Ive also mounted the big pulley on the hardox disk. See profile pic
Rob

[ewan]

Featherweight Database

Looks very scary!

[Kenny]

Featherweight Database

like the polycarb milled bulkheads

[robotic_ants]

Featherweight Database

Soon we could have a rumble with only robots using Christians Hardox disks...!

MicroCHIPs looking very swish Rob, btw what was the drive motors ment to be before you changed to the drill motors.

Chris - ^_^

[robjones]

Featherweight Database

window motors Chris. They were heavy and hard to secure to a wheel and a bit slow.
Rob

[robotic_ants]

Featherweight Database

Ah its all the best youve fitted some drill motors then. Im keeping an eye on the Team Whyachi and the cheaper BaneBots planetary gear motors but for the moment im sticking with my own modified drill gearboxes.

Chris - ^_^

[dragonmaster_1]

Featherweight Database

Just getting the parts together for my next feather. drive 2 EV Warriors Just ordered a Sidewinder got some hardox for the front scoop rest of body 20mm nylon.

[ewan]

Featherweight Database

How did the HTI spinner do at XFM Colchester tony?

[dragonmaster_1]

Featherweight Database

The disc worked great it cut a 1mm deep hole in my 4mm hardox on Dragon 2 with 1 hit. But he had drive proplems so did not do well spent most of the time trying to fix the drive. The HTIs worked great he controlled it with a 30amp Elextronize with external relays.